SLC440AS-ER-0170-14 Schmersal Safety Light Curtains

Product Details

• Detection ability for test bodies at v = 1.6 m/s
  14 mm
• Safety functions
  Yes
• Width of sensor
  27.8 mm
• Degree of protection
  IP67 to EN 60529
• Rated impulse withstand voltage Uimp
  0.8 kV
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Outputs, DO 0 … DO 3
  No Function
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• Reaction time, maximum
  13 ms
• Range, protection field, minimum
  300 mm
• Terminal Connector
  Connector
• Storage and transport temperature, minimum
  -25 °C
• Degree of pollution to VDE 0100
  2
• AS-i Profile
  S-0.B.F.E
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Standards
  EN 50295, EN 62061, EN 61496-1
• Height of the protection field
  170 mm
• Height of the Sensor (Transmitter)
  283 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 0.35 mm
• AS-i Operating voltage, minimum
  18 VDC
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P2
No function
Number of beams
16
Active principle
optoelectronic
Height of Receiver
303 mm
Ambient temperature, maximum
+50 °C
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Gross weight
530 g
Terminal, Connector, Transmitter
Connector plug M12, 4-pole
Terminal connector, Recipient
Connector plug M12, 5-pole
Ambient temperature, minimum
-10 °C
Rated insulation voltage Ui
32 VDC
Protection rating
III
AS-i Version
V 3.0
AS-i Parameter bits, P1
Low beam quality
Integral System Diagnostics, status
Yes
Enclosure material
Aluminium
Hide function
Yes
Range, protection field, maximum
7,000 mm
Length of sensor
33 mm
Storage and transport temperature, maximum
+70 °C
Overvoltage category
III
AS-i Parameter bits, P0
No function
AS-i Input module address
0
Power consumption, Receiver
150 mA
AS-i Current consumption, maximum
50 mA
7-segment display
Yes
Wave length of the sensor
880 nm
Restistance to shock
10 g / 16 ms
AS-i Specification
Safety-Slave
AS-i Parameter bits, P3
Internal device error (FID)
Power consumption, Transmitter
75 mA

SLC440AS-ER-0170-14 Related Documents