AZ201ST-T-1P2P-2965-1 Schmersal Safety Switches

Product Details

• general information
  Individual coding, multiple teaching
• Number of safety contacts
  2
• Width of sensor
  40 mm
• Ambient temperature, maximum
  +70 °C
• Note (Relative humidity)
  non-condensing
• Operating voltage, minimum
  20.4 VDC
• Classification ZVEI CB24I, Source
  C2
• Actuating speed, maximum
  0.2 m/s
• Ensured switch distance ON Sao
  4 mm
• Protection rating
  III
• Switching frequency, approx.
  1 Hz
• Voltage drop Ud, maximum
  4 V
• Current leakage Ir
  0.5 mA
• Coding level according to ISO 14119
  Low
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Idle assignable pushbutton
  Yes
• Terminal Connector
  Connector M23, 12-pole
• Height of sensor
  220 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• No-load supply current I0
  100 mA
Current, Utilisation category DC13
0.05 A
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-1
Series-wiring
Yes
Mechanical life, minimum
1,000,000 Operations
Length of sensor
50 mm
Ambient temperature, minimum
-25 °C
Operating voltage, maximum
26.4 VDC
Active principle
RFID, 125 kHz
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Short circuit detection
Yes
Freely assignable LED
Yes
Hysteresis (Switch distance), maximum
1.5 mm
Storage and transport temperature, maximum
+85 °C
Rated insulation voltage Ui
32 VDC
Rated operating current (safety outputs)
250 mA
Operating current
50 mA
Time to readiness, maximum
4,000 ms
Safety functions
Yes
Latching force
30 N
Ensured switch distance OFF Sar
30 mm
Relative humidity, minimum
30 %
Overvoltage category
III
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Duration of risk, maximum
200 ms
Short-circuit recognition
Yes
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Storage and transport temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Degree of pollution to VDE 0100
3
Enclosure material
Glass-fibre, reinforced thermoplastic
Integral System Diagnostics, status
Yes
Repeat accuracy R R
0.5 mm
Relative humidity, maximum
95 %
Rated impulse withstand voltage Uimp
0.8 kV
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC13
24 VDC

AZ201ST-T-1P2P-2965-1 Related Documents