AZM400Z-ST2-2P2P-E Schmersal Safety Accessories

Product Details

• Integral System Diagnostics, status
  Yes
• Electronic manual release
  Yes
• Mechanical life, minimum
  1,000,000 Operations
• Tightening torque of the screw
  8 Nm
• Restistance to shock
  30 g / 11 ms
• Operating Current
  100 mA
• Enclosure material
  Light alloy die-casting
• Time to readiness, maximum
  1,500 ms
• general information
  Universal coding
• Note (Lateral force at bolt return)
  Does not apply to emergency exit, Bowden cable and manual release
• Ambient temperature, maximum
  +55 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Switching thresholds of the control inputs
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Operating current
  50 mA
• Current leakage Ir
  1.5 mA
• Gross weight
  692 g
• Number of diagnostic signals
  2
• Note (Mechanical lifetime)
  Which have a lateral force Ftrans = 100 N: 100.000 operations
• Length of sensor
  46.7 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
Current consumption at 24V, maximum
15 mA
Classification ZVEI CB24I, Sink
C1, C2
Coding level according to ISO 14119
Low
Active principle
Magnetic field, RFID
Lateral force at bolt return, maximal (against locked door)
300 N
Height of sensor
166.7 mm
Degree of pollution to VDE 0100
3
Rated operating voltage
24 VDC
Allowable discrepancy time (input), maximum
10 s
Versions
short-circuit proof, p-type
Reaction time, maximum
100 ms
Short-circuit recognition
Yes
Clamping force in accordance with ISO14119 Fzh
10,000 N
Terminal Connector
2 connector M12, 8 and 5 pin
Storage and transport temperature, minimum
-40 °C
Current consumption, maximum
600 mA
Required rated short-circuit current to EN 60947-5-1
100 A
Short circuit detection
Yes
Number of safety contacts
2
Clamping force, maximum Fmax
13,000 N
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Rated insulation voltage Ui
32 VDC
Current consumption at 24V, minimum
10 mA
Switching frequency, approx.
0.3 Hz
Rated operating current (safety outputs)
250 mA
Open / close cycle (Motor), minimum
3
Voltage, Utilisation category DC13
24 VDC
Note
The diagnostic output are not safety relevant outputs!
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Manual release
Yes
Interlocking principle
bistable
Ambient temperature, minimum
-20 °C
Protection rating
III
No-load supply current I0
100 mA
Minimal average cycle time (with continuous operation)
20 s
Storage and transport temperature, maximum
+85 °C
Guard locking monitored
Yes
Safety functions
Yes
Minimum distance devices
30 mm
Width of sensor
77.8 mm
Overvoltage category
III
Classification ZVEI CB24I, Source
C2
Current, Utilisation category DC12
0.05 A
Current, Utilisation category DC13
0.05 A
Voltage, Utilisation category DC12
24 VDC
Voltage drop Ud, maximum
2 V

AZM400Z-ST2-2P2P-E Related Documents