AZ201-I2-SK-T-1P2P Schmersal Safety Switches

Product Details

• general information
  Individual coding, multiple teaching
• Mechanical life, minimum
  1,000,000 Operations
• Wire cross-section, maximum
  15 AWG
• Ambient temperature, maximum
  +70 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Switching frequency, approx.
  1 Hz
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Safety functions
  Yes
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Storage and transport temperature, minimum
  -25 °C
• Resistance to vibrations to EN 60068-2-6
  10 … 150 Hz, amplitude 0.35 mm
• Current leakage Ir
  0.5 mA
• Operating current
  50 mA
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Gross weight
  403.8 g
• Latching force
  30 N
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• Protection rating
  III
• No-load supply current I0
  100 mA
• Standards
  IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Duration of risk, maximum
200 ms
Series-wiring
Yes
Cable section, minimum
0.25 mm²
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Operating voltage, maximum
26.4 VDC
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Number of safety contacts
2
Cable section, maximum
1.5 mm²
Length of sensor
50 mm
Relative humidity, maximum
95 %
Degree of pollution to VDE 0100
3
Classification ZVEI CB24I, Source
C2
Time to readiness, maximum
4,000 ms
Integral System Diagnostics, status
Yes
Wire cross-section, minimum
23 AWG
Storage and transport temperature, maximum
+85 °C
Rated insulation voltage Ui
32 VDC
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage, Utilisation category DC13
24 VDC
Coding level according to ISO 14119
High
Short-circuit recognition
Yes
Actuating speed, maximum
0.2 m/s
Width of sensor
40 mm
Relative humidity, minimum
30 %
Overvoltage category
III
Rated operating current (safety outputs)
250 mA
Current, Utilisation category DC13
0.05 A
Active principle
RFID, 125 kHz
Short circuit detection
Yes
Terminal Connector
Screw connection
Height of sensor
220 mm
Note (Relative humidity)
non-condensing
Operating voltage, minimum
20.4 VDC
Classification ZVEI CB24I, Sink
C1, C2
Voltage drop Ud, maximum
4 V

AZ201-I2-SK-T-1P2P Related Documents