AZ201SK-T-1P2P Schmersal Safety Switches

Product Details

• Safety functions
  Yes
• Terminal Connector
  Screw connection
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• Rated insulation voltage Ui
  32 VDC
• Overvoltage category
  III
• No-load supply current I0
  100 mA
• Voltage, Utilisation category DC13
  24 VDC
• Latching force
  30 N
• Width of sensor
  40 mm
• Restistance to shock
  30 g / 11 ms
• Storage and transport temperature, maximum
  +85 °C
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current, Utilisation category DC13
  0.05 A
• Cable section, minimum
  0.25 mm²
• Relative humidity, minimum
  30 %
• Degree of pollution to VDE 0100
  3
• Rated operating current (safety outputs)
  250 mA
• Wire cross-section, minimum
  23 AWG
• Storage and transport temperature, minimum
  -25 °C
• Operating voltage, minimum
  20.4 VDC
Classification ZVEI CB24I, Source
C2
Cable section, maximum
1.5 mm²
Ambient temperature, minimum
-25 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating current
50 mA
Wire cross-section, maximum
15 AWG
Note (Relative humidity)
non-condensing
Operating voltage, maximum
26.4 VDC
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Ambient temperature, maximum
+70 °C
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency, approx.
1 Hz
Actuating speed, maximum
0.2 m/s
Height of sensor
220 mm
Relative humidity, maximum
95 %
Current leakage Ir
0.5 mA
Number of safety contacts
2
Length of sensor
50 mm
Protection rating
III
Voltage drop Ud, maximum
4 V
Classification ZVEI CB24I, Sink
C1, C2
Active principle
RFID, 125 kHz
Series-wiring
Yes
general information
Universal coding
Time to readiness, maximum
4,000 ms
Short circuit detection
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Short-circuit recognition
Yes
Duration of risk, maximum
200 ms
Integral System Diagnostics, status
Yes
Gross weight
403.8 g
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Mechanical life, minimum
1,000,000 Operations
Coding level according to ISO 14119
Low

AZ201SK-T-1P2P Related Documents