AZ201-I1-ST-T-AS Schmersal Safety Switches

Product Details

• Latching
  Yes
• Coding level according to ISO 14119
  High
• Mechanical life, minimum
  1,000,000 Operations
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• Relative humidity, minimum
  10 %
• Protection rating
  III
• AS-i Specification
  Safety-Slave
• AS-i Input, Channel 2
  Data bits DI 2 / DI 3 = dynamic code transmission
• AS-i Outputs, DO 1
  No Function
• Active principle
  RFID
• Integral System Diagnostics, status
  Yes
• Actuating speed, maximum
  0.2 m/s
• Storage and transport temperature, minimum
  -25 °C
• Overvoltage category
  III
• AS-i Current consumption, maximum
  100 mA
• AS-i, IO-Code
  0x0
• AS-i Outputs, DO 3
  No Function
• Note (AS-i Parameter bits)
  FID: periphery error
• Gross weight
  351 g
• Reaction time, maximum
  100 ms
Width of sensor
40 mm
Ambient temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code2
0xE
AS-i Parameter bits, P0
Safety guard and actuator detected
Safety functions
Yes
Enclosure material
Glass-fibre, reinforced thermoplastic
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Ambient temperature, maximum
+65 °C
Switching frequency, maximum
1 Hz
AS-i Version
V 3.0
AS-i Outputs, DO 0
No Function
AS-i AS-i Parameter bits (A/B Slave), P2
Enabling inhibit (tamper protection time) active (FID)
general information
Individual coding
Latching force
30 N
Storage and transport temperature, maximum
+85 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i, ID-Code
0xB
AS-i Parameter bits, P1
Static 0
Number of actuating directions
2
Time to readiness, maximum
4,000 ms
Height of sensor
220 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Rated insulation voltage Ui
32 VDC
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Profile
S-0.B.F.E
AS-i Outputs, DO 2
No Function
AS-i Input module address
0
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Tightening torque for the fixing screws, maximum
8 Nm
Relative humidity, maximum
95 %
Degree of pollution to IEC/EN 60664-1
3
AS-i, ID-Code1
0xF
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Duration of risk, maximum
200 ms
Length of sensor
50 mm
Note (Relative humidity)
non-condensing, non-icing
AS-i Operating voltage, minimum
26.5 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P3
Internal device error (FID)

AZ201-I1-ST-T-AS Related Documents