AES 7112.2 230 VAC Schmersal Electronic Components

Product Details

• Gross weight
  284 g
• Mechanical life, minimum
  3,000,000 Operations
• Storage and transport temperature, maximum
  +70 °C
• Rated control voltage at AC 60 Hz, maximum
  253 VAC
• Integral System Diagnostics, status
  Yes
• Automatic reset function
  Yes
• Storage and transport temperature, minimum
  -25 °C
• Thermal test current
  5 A
• Voltage, Utilisation category DC13
  24 VDC
• Number of LEDs
  1
• Number of shutters
  4
• Terminal Connector
  Screw connection, rigid or flexible
• Degree of protection of the enclosure
  IP40
• Ambient temperature, minimum
  +0 °C
• Note (Contact resistance)
  in new state
• Rated control voltage at AC 50 Hz, maximum
  253 VAC
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Number of safety contacts
  1
• Width
  105 mm
• Degree of protection of clips or terminals
  IP20
Degree of pollution to IEC/EN 60664-1
2
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Short-circuit recognition
Yes
Restistance to shock
30 g / 11 ms
Rated AC voltage for controls, 60 Hz, minimum
195.5 VAC
Current, Utilisation category AC-15
2 A
Current, Utilisation category DC12
0.1 A
Material of the contacts, electrical
AgSn0
Mounting
Snaps onto standard DIN rail to EN 60715
Height
96 mm
Rated impulse withstand voltage Uimp
4 kV
Rated operating voltage
230 VAC
Electrical power consumption
1.5 W
Voltage, Utilisation category AC15
250 VAC
EMC rating
EMC-Directive
Stop-Category
0
Wire breakage detection
Yes
Degree of protection of the mounting space
IP54
Rated AC voltage for controls, 50 Hz, minimum
195.5 VAC
Drop-out delay in case of power failure, typically
80 ms
Reset after disconnection of supply voltage
Yes
Cable section, maximum
1.5 mm²
Ambient temperature, maximum
+55 °C
Frequency range
50 Hz, 60 Hz
Pull-in delay at RESET, typically
20 ms
Current, Utilisation category DC13
2 A
Number of openers
2
Depth
58 mm
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Overvoltage category
III
Drop-out delay in case of emergency, typically
20 ms
Conduction resistance, maximum
40 Ω
Contact resistance, maximum
0.1 Ω
Voltage, Utilisation category DC12
24 VDC
Pull-in delay at automatic start, maximum, typically
100 ms
Switching capacity, maximum
24 VDC
Switching capacity, minimum
10 mA

AES 7112.2 230 VAC Related Documents