AES 1165.3-2214-1 24 VAC Schmersal Electronic Components

Product Details

• Stop-Category
  0
• Earth connection detection
  Yes
• Cable section, maximum
  2.5 mm²
• Resistance to vibrations to EN 60068-2-6
  10...55 Hz, Amplitude 0.35 mm, ± 15 %
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Current, Utilisation category AC-15
  6 A
• EMC rating
  EMC-Directive
• Voltage, Utilisation category DC12
  24 VDC
• Wire breakage detection
  Yes
• Number of safety contacts
  1
• Width
  22.5 mm
• Ambient temperature, maximum
  +55 °C
• Degree of pollution to IEC/EN 60664-1
  2
• Note (Contact resistance)
  in new state
• Pull-in delay at RESET, typically
  20 ms
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Short-circuit recognition
  Yes
• Integral System Diagnostics, status
  Yes
• Terminal designations
  IEC/EN 60947-1
• Ambient temperature, minimum
  +0 °C
Thermal test current
6 A
Drop-out delay in case of power failure, typically
80 ms
Switching capacity, minimum
10 mA
Input signal, LOW Signal 0
0 … 2 VDC
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Number of auxiliary contacts
2
Mounting
Snaps onto standard DIN rail to EN 60715
Depth
121 mm
Storage and transport temperature, maximum
+70 °C
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Electrical power consumption
5 W
Current, Utilisation category DC13
6 A
Climatic stress
BG-GS-ET-14, IEC 60947-5-3
Number of inputs for NO
1
Cable section, minimum
0.25 mm²
Restistance to shock
30 g / 11 ms
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Contact resistance, maximum
0.1 Ω
Conduction resistance, maximum
40 Ω
Switching capacity, maximum
24 VDC
Gross weight
164 g
Number of inputs for NC
2
Tightening torque of Clips
0.6 Nm
Degree of protection of clips or terminals
IP20
Overvoltage category
III
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Reset after disconnection of supply voltage
Yes
Mechanical life, minimum
20,000,000 Operations
Height
100 mm
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Number of signalling outputs
2
Degree of protection of the enclosure
IP40
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
Rated control voltage at DC, maximum
28.8 VDC
Pull-in delay at automatic start, maximum, typically
100 ms
Automatic reset function
Yes
Number of LEDs
1
Terminal Connector
Screw connection, rigid or flexible
Degree of protection of the mounting space
IP54
Frequency range
50 Hz, 60 Hz
Drop-out delay in case of emergency, typically
20 ms
Voltage, Utilisation category DC13
24 VDC
Storage and transport temperature, minimum
-25 °C
Voltage, Utilisation category AC15
230 VAC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Current, Utilisation category DC12
0.1 A
Rated impulse withstand voltage Uimp
4 kV

AES 1165.3-2214-1 24 VAC Related Documents