AES 1112 24 VDC Schmersal Electronic Components

Product Details

• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Number of safety contacts
  1
• Number of openers
  2
• Restistance to shock
  30 g / 11 ms
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Current, Utilisation category AC-15
  3 A
• Voltage, Utilisation category DC12
  24 VDC
• Wire breakage detection
  Yes
• Integral System Diagnostics, status
  Yes
• Degree of protection of the enclosure
  IP40
• Storage and transport temperature, maximum
  +70 °C
• Degree of pollution to IEC/EN 60664-1
  2
• Stop-Category
  0
• Cable section, maximum
  2.5 mm²
• Terminal Connector
  Screw connection, rigid or flexible
• Ambient temperature, minimum
  +0 °C
• Overvoltage category
  III
• Gross weight
  122 g
• Climatic stress
  EN 60068-2-3, BG-GS-ET-14
• Number of LEDs
  1
Terminal designations
IEC/EN 60947-1
Depth
110 mm
Width
22.5 mm
Storage and transport temperature, minimum
-25 °C
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Mechanical life, minimum
10,000,000 Operations
Material of the contacts, electrical
AgCdO
Degree of protection of clips or terminals
IP20
Frequency range
50 Hz, 60 Hz
Drop-out delay in case of power failure, typically
80 ms
Automatic reset function
Yes
Mounting
Snaps onto standard DIN rail to EN 60715
Tightening torque of Clips
0.6 Nm
Degree of protection of the mounting space
IP54
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated control voltage at DC, maximum
27.6 VDC
Voltage, Utilisation category AC15
230 VAC
Ambient temperature, maximum
+55 °C
Drop-out delay in case of emergency, typically
20 ms
Reset after disconnection of supply voltage
Yes
Number of shutters
1
Height
75 mm
Rated impulse withstand voltage Uimp
4 kV
Contact resistance, maximum
0.1 Ω
Switching capacity, minimum
10 VDC
Electrical power consumption
2.4 W
EMC rating
EMC-Directive
Rated operating voltage
24 VDC ± 15 %
Pull-in delay at RESET, typically
20 ms
Current, Utilisation category DC13
2 A
Current, Utilisation category DC12
0.1 A
Note (Contact resistance)
in new state
Conduction resistance, maximum
40 Ω
Pull-in delay at automatic start, maximum, typically
100 ms
Switching capacity, maximum
2 A
Thermal test current
4 A
Voltage, Utilisation category DC13
24 VDC

AES 1112 24 VDC Related Documents