AES 2555 UE: 24...230V AC/DC Schmersal Electronic Components

Product Details

• Feedback circuit
  Yes
• Wire breakage detection
  Yes
• Standards
  IEC 61508, IEC/EN 60204-1, IEC 60947-5-3
• Integral System Diagnostics, status
  Yes
• Short-circuit recognition
  Yes
• Stop-Category
  0
• Number of openers
  2
• Cable section, minimum
  0.25 mm²
• Degree of protection of clips or terminals
  IP20
• Degree of pollution to IEC/EN 60664-1
  2
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Current, Utilisation category AC-15
  3 A
• Number of LEDs
  1
• Cable section, maximum
  2.5 mm²
• Storage and transport temperature, minimum
  -25 °C
• Electrical power consumption
  5 W
• Number of auxiliary contacts
  1
• Terminal Connector
  Screw connection, rigid or flexible
• Frequency range
  50 Hz, 60 Hz
• Contact resistance, maximum
  0.1 Ω
Voltage, Utilisation category AC15
230 VAC
Voltage, Utilisation category DC12
24 VDC
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Gross weight
319 g
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Enclosure material
Glass-fibre, reinforced thermoplastic
Reset after disconnection of supply voltage
Yes
Mounting
Snaps onto standard DIN rail to EN 60715
Number of signalling outputs
2
Number of shutters
2
Number of safety contacts
4
Terminal designations
IEC/EN 60947-1
Width
45 mm
Depth
121 mm
Degree of protection of the mounting space
IP54
Ambient temperature, minimum
+0 °C
Overvoltage category
III
Rated impulse withstand voltage Uimp
4 kV
Storage and transport temperature, maximum
+70 °C
Restistance to shock
30 g / 11 ms
Rated control voltage at AC 60 Hz, maximum
253 VAC
Rated control voltage at DC, maximum
253 VDC
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Drop-out delay in case of power failure, typically
80 ms
Pull-in delay at RESET, typically
20 ms
Current, Utilisation category DC13
2 A
Input signal, HIGH Signal 1
10 … 30 VDC
Switching capacity, minimum
10 mA
Input signal, LOW Signal 0
0 … 2 VDC
Conduction resistance, maximum
40 Ω
EMC rating
EMC-Directive
Automatic reset function
Yes
Mechanical life, minimum
20,000,000 Operations
Number of undelayed semi-conductor outputs with signaling function
2
Degree of protection of the enclosure
IP40
Height
100 mm
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated operating voltage
24 ... 230 VAC/DC
Thermal test current
6 A
Drop-out delay in case of emergency, typically
20 ms
Note (Contact resistance)
in new state
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category DC12
0.1 A
Switching capacity, maximum
2 A
Tightening torque of Clips
0.6 Nm
Ambient temperature, maximum
+55 °C
Rated control voltage at AC 50 Hz, maximum
253 VAC
Pull-in delay at automatic start, maximum, typically
100 ms

AES 2555 UE: 24...230V AC/DC Related Documents