AES 1176 Schmersal Electronic Components

Product Details

• Stop-Category
  0
• Gross weight
  155 g
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Depth
  121 mm
• Ambient temperature, minimum
  +0 °C
• Degree of pollution to IEC/EN 60664-1
  2
• Contact resistance, maximum
  0.1 Ω
• Voltage, Utilisation category AC15
  230 VAC
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Integral System Diagnostics, status
  Yes
• Cable section, maximum
  2.5 mm²
• Height
  100 mm
• Frequency range
  50 Hz, 60 Hz
• Note (Contact resistance)
  in new state
• Current, Utilisation category DC13
  6 A
• Voltage, Utilisation category DC12
  24 VDC
• Climatic stress
  EN 60068-2-3, BG-GS-ET-14
• Reset after disconnection of supply voltage
  Yes
• Terminal Connector
  Screw connection, rigid or flexible
• Degree of protection of the mounting space
  IP54
Rated impulse withstand voltage Uimp
4 kV
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
EMC rating
EMC-Directive
Restistance to shock
30 g / 11 ms
Drop-out delay in case of emergency, typically
20 ms
Wire breakage detection
Yes
Number of LEDs
1
Tightening torque of Clips
0.6 Nm
Storage and transport temperature, minimum
-25 °C
Thermal test current
6 A
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Switching capacity, minimum
10 mA
Current, Utilisation category DC12
0.1 A
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Earth connection detection
Yes
Number of shutters
1
Width
22.5 mm
Storage and transport temperature, maximum
+70 °C
Rated operating voltage
24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
Electrical power consumption
5 W
Current, Utilisation category AC-15
6 A
Input signal, LOW Signal 0
0 … 2 VDC
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Number of openers
1
Terminal designations
IEC/EN 60947-1
Degree of protection of clips or terminals
IP20
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Rated AC voltage for controls at DC minimum
20.4 VDC
Voltage, Utilisation category DC13
24 VDC
Short-circuit recognition
Yes
Start-up test
Yes
Cable section, minimum
0.25 mm²
Ambient temperature, maximum
+55 °C
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Drop-out delay in case of power failure, typically
80 ms
Pull-in delay at RESET, typically
20 ms
Automatic reset function
Yes
Feedback circuit
Yes
Number of safety contacts
1
Mechanical life, minimum
20,000,000 Operations
Overvoltage category
III
Pull-in delay at automatic start, maximum, typically
100 ms
Switching capacity, maximum
24 VDC
Rated control voltage at DC, maximum
28.8 VDC
Conduction resistance, maximum
40 Ω
Degree of protection of the enclosure
IP40
Input signal, HIGH Signal 1
10 … 30 VDC

AES 1176 Related Documents