OBR6000-R103-EP-IO-V3 Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 65 mm at a distance of 1 m
• Ripple
  max. 10 %
• SIO mode support
  yes
• Housing height
  43.9 mm
• Light source
  LED
• Control elements
  Light-on/dark-on changeover switch
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
• Housing width
  15 mm
• Housing depth
  26.7 mm
• Polarization filter
  yes
• Diagnostic Coverage (DC)
  0 %
• Min. cycle time
  2.3 ms
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
• Response time
  0.5 ms
• Threshold detection range
  8 m
• Mission Time (TM)
  20 a
• Device ID
  0x110204 (1114628)
• Communication interface
  IEC 61131-9
• Degree of protection
  IP67 / IP69 / IP69K
Effective detection range
0 ... 6 m
Operating voltage
10 ... 30 V DC
Protection class
III
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
LED risk group labelling
exempt group
MTTFd
724 a
No-load supply current
< 25 mA at 24 V supply voltage
Switching current
max. 100 mA , resistive load
Voltage drop
≤ 1.5 V DC
Connection
M8 x 1 connector, 3-pin
Light type
modulated visible red light
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Reflector distance
0.03 ... 6 m
Ambient light limit
EN 60947-5-2
IO-Link revision
1.1
Switching frequency
1000 Hz
Product standard
EN 60947-5-2
Mass
approx. 12 g
Opening angle
3.7 °
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Process data width
Process data input 2 Bit, Process data output 2 Bit
EAC conformity
TR CU 020/2011
Optical face
PMMA
Reference target
H85-2 reflector
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Compatible master port type
A
Housing
PC (Polycarbonate)

OBR6000-R103-EP-IO-V3 Related Documents