OBR6000-R103-2EP-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Effective detection range
  0 ... 6 m
• Diagnostic Coverage (DC)
  0 %
• Min. cycle time
  2.3 ms
• Response time
  0.5 ms
• Connection
  fixed cable 300 mm with M8 x 1 male connector; 4-pin
• LED risk group labelling
  exempt group
• MTTFd
  724 a
• No-load supply current
  < 25 mA at 24 V supply voltage
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching frequency
  1000 Hz
• Degree of protection
  IP67 / IP69 / IP69K
• Light type
  modulated visible red light
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Process data width
  Process data input 2 Bit, Process data output 2 Bit
• Usage category
  DC-12 and DC-13
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Mass
  approx. 17 g
• Threshold detection range
  8 m
• Control elements
  Light-on/dark-on changeover switch
• Protection class
  III
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Optical face
PMMA
Reflector distance
0.03 ... 6 m
Interface type
IO-Link ( via C/Q = pin 4 )
Compatible master port type
A
Communication interface
IEC 61131-9
Housing
PC (Polycarbonate)
Polarization filter
yes
Mission Time (TM)
20 a
Ripple
max. 10 %
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Diameter of the light spot
approx. 65 mm at a distance of 1 m
Operating voltage
10 ... 30 V DC
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Light source
LED
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Housing width
15 mm
Reference target
H85-2 reflector
Ambient light limit
EN 60947-5-2
IO-Link revision
1.1
SIO mode support
yes
Product standard
EN 60947-5-2
Housing depth
26.7 mm
Opening angle
3.7 °
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Device ID
0x110204 (1114628)
Voltage drop
≤ 1.5 V DC
Housing height
36.5 mm

OBR6000-R103-2EP-IO-0,3M-V31 Related Documents