OBR6000-R103-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Housing depth
  26.7 mm
• Cable length
  2 m
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Reference target
  H85-2 reflector
• Diagnostic Coverage (DC)
  0 %
• Transfer rate
  COM2 (38.4 kBit/s)
• Threshold detection range
  8 m
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• IO-Link revision
  1.1
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Ambient light limit
  EN 60947-5-2
• Ripple
  max. 10 %
• SIO mode support
  yes
• Response time
  0.5 ms
• Connection
  2 m fixed cable
• Diameter of the light spot
  approx. 65 mm at a distance of 1 m
• Mission Time (TM)
  20 a
• Min. cycle time
  2.3 ms
• Voltage drop
  ≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K
Light type
modulated visible red light
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Interface type
IO-Link ( via C/Q = pin 4 )
Switching frequency
1000 Hz
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Polarization filter
yes
Opening angle
3.7 °
MTTFd
724 a
Compatible master port type
A
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
LED risk group labelling
exempt group
Operating voltage
10 ... 30 V DC
Process data width
Process data input 2 Bit, Process data output 2 Bit
Communication interface
IEC 61131-9
Housing height
36.5 mm
Reflector distance
0.03 ... 6 m
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Effective detection range
0 ... 6 m
No-load supply current
< 25 mA at 24 V supply voltage
Switching voltage
max. 30 V DC
Light source
LED
Control elements
Light-on/dark-on changeover switch
Device ID
0x110204 (1114628)
Usage category
DC-12 and DC-13
Protection class
III
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
EAC conformity
TR CU 020/2011
Mass
approx. 38 g
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Optical face
PMMA

OBR6000-R103-2EP-IO Related Documents