OBR6000-R103-2EP-IO-V31 Pepperl + Fuchs Electronic Components

Product Details

• Operating voltage
  10 ... 30 V DC
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• LED risk group labelling
  exempt group
• Reflector distance
  0.03 ... 6 m
• Light type
  modulated visible red light
• Diagnostic Coverage (DC)
  0 %
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching frequency
  1000 Hz
• Threshold detection range
  8 m
• Control elements
  Light-on/dark-on changeover switch
• IO-Link revision
  1.1
• Voltage drop
  ≤ 1.5 V DC
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Connection
  M8 x 1 connector, 4-pin
• Diameter of the light spot
  approx. 65 mm at a distance of 1 m
• Ambient light limit
  EN 60947-5-2
• Ripple
  max. 10 %
• Switching voltage
  max. 30 V DC
• EAC conformity
  TR CU 020/2011
• Mass
  approx. 12 g
Polarization filter
yes
MTTFd
724 a
No-load supply current
< 25 mA at 24 V supply voltage
SIO mode support
yes
Communication interface
IEC 61131-9
Degree of protection
IP67 / IP69 / IP69K
Light source
LED
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
0.5 ms
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Reference target
H85-2 reflector
Mission Time (TM)
20 a
Protection class
III
Compatible master port type
A
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
Interface type
IO-Link ( via C/Q = pin 4 )
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Min. cycle time
2.3 ms
Usage category
DC-12 and DC-13
Housing height
43.9 mm
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Housing depth
26.7 mm
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Effective detection range
0 ... 6 m
Opening angle
3.7 °
Device ID
0x110204 (1114628)

OBR6000-R103-2EP-IO-V31 Related Documents