OBR6000-R103-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• MTTFd
  724 a
• No-load supply current
  < 25 mA at 24 V supply voltage
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Voltage drop
  ≤ 1.5 V DC
• Housing height
  36.5 mm
• Ambient light limit
  EN 60947-5-2
• Protection class
  III
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Cable length
  0.3 m
• Diameter of the light spot
  approx. 65 mm at a distance of 1 m
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device ID
  0x110204 (1114628)
• Switching current
  max. 100 mA , resistive load
• EAC conformity
  TR CU 020/2011
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Threshold detection range
  8 m
• Parameterization indicator
  IO link communication: green LED goes out briefly (1 Hz)
• SIO mode support
  yes
Switching frequency
1000 Hz
Housing depth
26.7 mm
Light source
LED
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Min. cycle time
2.3 ms
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Polarization filter
yes
Operating voltage
10 ... 30 V DC
Compatible master port type
A
Housing width
15 mm
Reference target
H85-2 reflector
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Usage category
DC-12 and DC-13
Communication interface
IEC 61131-9
Degree of protection
IP67 / IP69 / IP69K
Reflector distance
0.03 ... 6 m
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 2 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Mass
approx. 23 g
Effective detection range
0 ... 6 m
Opening angle
3.7 °
Interface type
IO-Link ( via C/Q = pin 4 )
Transfer rate
COM2 (38.4 kBit/s)
Response time
0.5 ms
Housing
PC (Polycarbonate)
LED risk group labelling
exempt group
Mission Time (TM)
20 a
Ripple
max. 10 %
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Optical face
PMMA

OBR6000-R103-2EP-IO-0,3M-V1 Related Documents