OBR6000-R103-EP-IO-0,3M-V3 Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Mission Time (TM)
  20 a
• Switching voltage
  max. 30 V DC
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Threshold detection range
  8 m
• MTTFd
  724 a
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
• Product standard
  EN 60947-5-2
• Connection
  300 mm fixed cable with M8 x 1, 3-pin connector
• Light source
  LED
• Ripple
  max. 10 %
• No-load supply current
  < 25 mA at 24 V supply voltage
• Communication interface
  IEC 61131-9
• Housing depth
  26.7 mm
• Reference target
  H85-2 reflector
• Device ID
  0x110204 (1114628)
• IO-Link revision
  1.1
• Usage category
  DC-12 and DC-13
Housing width
15 mm
Polarization filter
yes
Protection class
III
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Effective detection range
0 ... 6 m
Opening angle
3.7 °
Interface type
IO-Link ( via C/Q = pin 4 )
Min. cycle time
2.3 ms
Switching current
max. 100 mA , resistive load
Degree of protection
IP67 / IP69 / IP69K
Diameter of the light spot
approx. 65 mm at a distance of 1 m
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Compatible master port type
A
Housing height
36.5 mm
Optical face
PMMA
Diagnostic Coverage (DC)
0 %
Operating voltage
10 ... 30 V DC
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
0.5 ms
Housing
PC (Polycarbonate)
LED risk group labelling
exempt group
Ambient light limit
EN 60947-5-2
Parameterization indicator
IO link communication: green LED goes out briefly (1 Hz)
SIO mode support
yes
Switching frequency
1000 Hz
Cable length
0.3 m
Reflector distance
0.03 ... 6 m
Control elements
Light-on/dark-on changeover switch
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 17 g

OBR6000-R103-EP-IO-0,3M-V3 Related Documents