OBG5000-R101-PPF-IO-V31 Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  H85-2 reflector
• Mission Time (TM)
  20 a
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Stability alarm output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Switching frequency
  500 Hz
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Diameter of the light spot
  approx. 170 mm at a distance of 3.5 m
• MTTFd
  600 a
• Compatible master port type
  A
• Communication interface
  IEC 61131-9
• EAC conformity
  TR CU 020/2011
• Light source
  LED
• No-load supply current
  < 25 mA at 24 V supply voltage
• Switching type
  The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, Alarm output - Pin2: NPN normally open, PNP normally closed
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Optical face
  PMMA
• Light type
  modulated visible red light
• Transfer rate
  COM2 (38.4 kBit/s)
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Voltage drop
  ≤ 1.5 V DC
Housing
PC (Polycarbonate)
Ambient light limit
EN 60947-5-2
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Switching current
max. 100 mA , resistive load
Degree of protection
IP67 / IP69 / IP69K
Threshold detection range
6 m
Diagnostic Coverage (DC)
0 %
SIO mode support
yes
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F),
Effective detection range
0 ... 5 m
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Usage category
DC-12 and DC-13
Housing depth
18.3 mm
Mass
approx. 10 g
Opening angle
approx. 5 °
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Response time
1 ms
Housing height
39.5 mm
LED risk group labelling
exempt group
Protection class
III
Process data width
Process data input 2 Bit, Process data output 2 Bit
Housing width
13.9 mm
Connection
M8 x 1 connector, 4-pin
Reflector distance
0 ... 5 m
Ripple
max. 10 %
Device ID
0x110A0A (1116682)
Switching voltage
max. 30 V DC
Product standard
EN 60947-5-2

OBG5000-R101-PPF-IO-V31 Related Documents