OBG5000-R101-2P1-IO Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 170 mm at a distance of 3.5 m
• Function indicator
  Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
• Compatible master port type
  A
• Housing depth
  18.3 mm
• Threshold detection range
  6 m
• Ripple
  max. 10 %
• SIO mode support
  yes
• Communication interface
  IEC 61131-9
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Opening angle
  approx. 5 °
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Transfer rate
  COM2 (38.4 kBit/s)
• Voltage drop
  ≤ 1.5 V DC
• Housing width
  13.9 mm
• Optical face
  PMMA
• Effective detection range
  0 ... 5 m
• Mission Time (TM)
  20 a
• Device ID
  0x110A09 (1116681)
• Switching voltage
  max. 30 V DC
• Product standard
  EN 60947-5-2
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
MTTFd
600 a
Interface type
IO-Link ( via C/Q = BK )
Usage category
DC-12 and DC-13
Housing height
31.9 mm
Ambient light limit
EN 60947-5-2
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Switching frequency
500 Hz
EAC conformity
TR CU 020/2011
Mass
approx. 36 g
Reflector distance
0 ... 5 m
No-load supply current
< 25 mA at 24 V supply voltage
Switching current
max. 100 mA , resistive load
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
2 m
LED risk group labelling
exempt group
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Connection
2 m fixed cable
Reference target
H85-2 reflector
Diagnostic Coverage (DC)
0 %
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
1 ms
Degree of protection
IP67 / IP69 / IP69K
Light source
LED
Light type
modulated visible red light
IO-Link revision
1.1
Switching type
The default setting is: C/Q - BK: NPN normally closed / light-on, PNP normally open / dark-on, IO-Link, /Q - WH: NPN normally open / dark-on, PNP normally closed / light-on
Housing
PC (Polycarbonate)

OBG5000-R101-2P1-IO Related Documents