OBG5000-R100-2EP1-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Threshold detection range
  6 m
• Operating voltage
  10 ... 30 V DC
• Min. cycle time
  2.3 ms
• Response time
  1 ms
• Housing
  PC (Polycarbonate)
• Light type
  modulated visible red light
• Ambient light limit
  EN 60947-5-2
• No-load supply current
  < 25 mA at 24 V supply voltage
• Compatible master port type
  A
• Communication interface
  IEC 61131-9
• Housing depth
  21.5 mm
• LED risk group labelling
  exempt group
• Light source
  LED
• Effective detection range
  0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
• Contrast detection levels
  10 % - clean, water filled PET bottles, 18 % - clear glass bottles, 40 % - colored glass or opaque materials, Adjustable via rotary switch
• Process data width
  Process data input 2 Bit, Process data output 2 Bit
• Product standard
  EN 60947-5-2
• Ambient temperature
  -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
• Reflector distance
  0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Opening angle
approx. 5 °
Ripple
max. 10 %
Switching frequency
500 Hz
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Degree of protection
IP67 / IP69 / IP69K
MTTFd
600 a
Device ID
0x110A07 (1116679)
Switching current
max. 100 mA , resistive load
Housing width
11 mm
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
SIO mode support
yes
Usage category
DC-12 and DC-13
Housing height
37.1 mm
Diagnostic Coverage (DC)
0 %
Transfer rate
COM2 (38.4 kBit/s)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Cable length
0.3 m
Diameter of the light spot
approx. 170 mm at a distance of 3.5 m
Mission Time (TM)
20 a
Protection class
III
Voltage drop
≤ 1.5 V DC
Mass
approx. 17 g
Reference target
H85-2 reflector
Control elements
Teach-In key
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally closed / light-on, PNP normally open / dark-on, IO-Link, /Q - Pin2: NPN normally open / dark-on, PNP normally closed / light-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA

OBG5000-R100-2EP1-IO-0,3M-V1 Related Documents