OBG5000-R101-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Reflector distance
  0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
• Diagnostic Coverage (DC)
  0 %
• Contrast detection levels
  10 % - clean, water filled PET bottles, 18 % - clear glass bottles, 40 % - colored glass or opaque materials, Adjustable via rotary switch
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Optical face
  PMMA
• Reference target
  H85-2 reflector
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Min. cycle time
  2.3 ms
• Voltage drop
  ≤ 1.5 V DC
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Cable length
  0.3 m
• Effective detection range
  0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
• Function indicator
  Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
• IO-Link revision
  1.1
• Switching voltage
  max. 30 V DC
• Housing width
  13.9 mm
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
• Product standard
  EN 60947-5-2
• Mass
  approx. 17 g
EAC conformity
TR CU 020/2011
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Diameter of the light spot
approx. 170 mm at a distance of 3.5 m
Control elements
Teach-In key
Transfer rate
COM2 (38.4 kBit/s)
Response time
1 ms
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing height
33.8 mm
Threshold detection range
6 m
Interface type
IO-Link ( via C/Q = pin 4 )
Light source
LED
Ambient light limit
EN 60947-5-2
Device ID
0x110A01 (1116673)
Switching current
max. 100 mA , resistive load
Degree of protection
IP67 / IP69 / IP69K
Light type
modulated visible red light
Mission Time (TM)
20 a
Protection class
III
Usage category
DC-12 and DC-13
Housing depth
18.3 mm
Opening angle
approx. 5 °
No-load supply current
< 25 mA at 24 V supply voltage
Compatible master port type
A
Communication interface
IEC 61131-9
Housing
PC (Polycarbonate)
LED risk group labelling
exempt group
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Switching frequency
500 Hz
MTTFd
600 a
Ripple
max. 10 %
Process data width
Process data input 2 Bit, Process data output 2 Bit

OBG5000-R101-2EP-IO-0,3M-V1 Related Documents