OBG5000-R100-E5-IO-V3 Pepperl + Fuchs Electronic Components

Product Details

• Threshold detection range
  6 m
• Operating voltage
  10 ... 30 V DC
• Transfer rate
  COM2 (38.4 kBit/s)
• Response time
  1 ms
• Degree of protection
  IP67 / IP69 / IP69K
• Reference target
  H85-2 reflector
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Control elements
  Teach-In key
• Compatible master port type
  A
• Usage category
  DC-12 and DC-13
• Housing height
  44.5 mm
• Light type
  modulated visible red light
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: PNP normally open / dark-on, IO-Link,
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Reflector distance
  0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
• Device ID
  0x110A0B (1116683)
• Communication interface
  IEC 61131-9
• Housing depth
  21.5 mm
Effective detection range
0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
Ambient light limit
EN 60947-5-2
No-load supply current
< 25 mA at 24 V supply voltage
Switching frequency
500 Hz
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
LED risk group labelling
exempt group
Diagnostic Coverage (DC)
0 %
Contrast detection levels
10 % - clean, water filled PET bottles, 18 % - clear glass bottles, 40 % - colored glass or opaque materials, Adjustable via rotary switch
Voltage drop
≤ 1.5 V DC
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F),
Mass
approx. 10 g
Opening angle
approx. 5 °
Protection class
III
Min. cycle time
2.3 ms
EAC conformity
TR CU 020/2011
Housing
PC (Polycarbonate)
MTTFd
600 a
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
1 PNP, short-circuit protected, reverse polarity protected
Product standard
EN 60947-5-2
Optical face
PMMA
Light source
LED
Ripple
max. 10 %
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Housing width
11 mm
Diameter of the light spot
approx. 170 mm at a distance of 3.5 m
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Process data width
Process data input 2 Bit, Process data output 2 Bit
Switching voltage
max. 30 V DC
Connection
M8 x 1 connector, 3-pin

OBG5000-R100-E5-IO-V3 Related Documents