OBG5000-R101-EP-IO-0,3M-V3 Pepperl + Fuchs Electronic Components

Product Details

• Effective detection range
  0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
• Diagnostic Coverage (DC)
  0 %
• Compatible master port type
  A
• Switching frequency
  500 Hz
• Mass
  approx. 17 g
• LED risk group labelling
  exempt group
• Control elements
  Teach-In key
• Protection class
  III
• Communication interface
  IEC 61131-9
• Housing depth
  18.3 mm
• Diameter of the light spot
  approx. 170 mm at a distance of 3.5 m
• Contrast detection levels
  10 % - clean, water filled PET bottles, 18 % - clear glass bottles, 40 % - colored glass or opaque materials, Adjustable via rotary switch
• Transfer rate
  COM2 (38.4 kBit/s)
• EAC conformity
  TR CU 020/2011
• Housing
  PC (Polycarbonate)
• Reflector distance
  0 ... 3.5 m in TEACH mode ; 0 ... 5 m at switch position "N"
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
Housing width
13.9 mm
Light source
LED
MTTFd
600 a
Interface type
IO-Link ( via C/Q = pin 4 )
Usage category
DC-12 and DC-13
Housing height
33.8 mm
Reference target
H85-2 reflector
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Opening angle
approx. 5 °
Function indicator
Yellow LED: Permanently lit - light path clear, Permanently off - object detected, Flashing (4 Hz) - insufficient operating reserve
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Ambient temperature
-20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m
Threshold detection range
6 m
Ambient light limit
EN 60947-5-2
Process data width
Process data input 2 Bit, Process data output 2 Bit
Response time
1 ms
Degree of protection
IP67 / IP69 / IP69K
Light type
modulated visible red light
Ripple
max. 10 %
Device ID
0x110A01 (1116673)
Product standard
EN 60947-5-2
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
No-load supply current
< 25 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link,
Voltage drop
≤ 1.5 V DC
Optical face
PMMA

OBG5000-R101-EP-IO-0,3M-V3 Related Documents