OBD800-R103-EP-IO-V3 Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Protection class
  III
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• EAC conformity
  TR CU 020/2011
• Degree of protection
  IP67 / IP69 / IP69K
• LED risk group labelling
  exempt group
• Mission Time (TM)
  20 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Communication interface
  IEC 61131-9
• Housing height
  43.9 mm
• Light source
  LED
• Control elements
  Light-on/dark-on changeover switch
• Device ID
  0x110103 (1114371)
• Switching frequency
  1000 Hz
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Detection range min.
  20 ... 40 mm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Voltage drop
  ≤ 1.5 V DC
• Mass
  approx. 12 g
Diameter of the light spot
approx. 55 mm at a distance of 800 mm
Operating voltage
10 ... 30 V DC
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
Switching voltage
max. 30 V DC
Housing width
15 mm
Detection range
2 ... 800 mm
Diagnostic Coverage (DC)
0 %
No-load supply current
< 25 mA at 24 V supply voltage
Compatible master port type
A
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing
PC (Polycarbonate)
Opening angle
3.7 °
MTTFd
724 a
IO-Link revision
1.1
Usage category
DC-12 and DC-13
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F)
Reference target
standard white, 100 mm x 100 mm
Interface type
IO-Link ( via C = pin 4 )
Response time
0.5 ms
Connection
M8 x 1 connector, 3-pin
Ambient light limit
EN 60947-5-2
Ripple
max. 10 %
Min. cycle time
2.3 ms
Product standard
EN 60947-5-2
Optical face
PMMA
Adjustment range
40 ... 800 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Housing depth
26.7 mm

OBD800-R103-EP-IO-V3 Related Documents