OBD800-R103-2EP-IO-0,3M-V31 Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  20 ... 40 mm
• Diagnostic Coverage (DC)
  0 %
• Interface type
  IO-Link ( via C = pin 4 )
• Switching current
  max. 100 mA , resistive load
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Adjustment range
  40 ... 800 mm
• Transfer rate
  COM2 (38.4 kBit/s)
• Communication interface
  IEC 61131-9
• Optical face
  PMMA
• Detection range
  2 ... 800 mm
• Mission Time (TM)
  20 a
• Device ID
  0x110103 (1114371)
• Voltage drop
  ≤ 1.5 V DC
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Mass
  approx. 17 g
• Opening angle
  3.7 °
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Cable length
  0.3 m
MTTFd
724 a
No-load supply current
< 25 mA at 24 V supply voltage
Switching frequency
1000 Hz
Response time
0.5 ms
Housing height
36.5 mm
LED risk group labelling
exempt group
Control elements
Light-on/dark-on changeover switch
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Housing depth
26.7 mm
Housing
PC (Polycarbonate)
Light type
modulated visible red light
Operating voltage
10 ... 30 V DC
Compatible master port type
A
Degree of protection
IP67 / IP69 / IP69K
Diameter of the light spot
approx. 55 mm at a distance of 800 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Protection class
III
IO-Link revision
1.1
Product standard
EN 60947-5-2
Housing width
15 mm
Light source
LED
Ripple
max. 10 %
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Ambient light limit
EN 60947-5-2
Reference target
standard white, 100 mm x 100 mm
SIO mode support
yes
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Usage category
DC-12 and DC-13
EAC conformity
TR CU 020/2011

OBD800-R103-2EP-IO-0,3M-V31 Related Documents