OBD800-R103-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  40 ... 800 mm
• Mission Time (TM)
  20 a
• Compatible master port type
  A
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Light source
  LED
• No-load supply current
  < 25 mA at 24 V supply voltage
• IO-Link revision
  1.1
• Switching current
  max. 100 mA , resistive load
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Optical face
  PMMA
• Opening angle
  3.7 °
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Usage category
  DC-12 and DC-13
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Ambient light limit
  EN 60947-5-2
• Protection class
  III
• Transfer rate
  COM2 (38.4 kBit/s)
• Response time
  0.5 ms
• Housing depth
  26.7 mm
Light type
modulated visible red light
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
Mass
approx. 23 g
Reference target
standard white, 100 mm x 100 mm
Control elements
Light-on/dark-on changeover switch
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Voltage drop
≤ 1.5 V DC
Housing
PC (Polycarbonate)
Diameter of the light spot
approx. 55 mm at a distance of 800 mm
Ripple
max. 10 %
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m
Detection range min.
20 ... 40 mm
Diagnostic Coverage (DC)
0 %
Interface type
IO-Link ( via C = pin 4 )
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Housing width
15 mm
LED risk group labelling
exempt group
MTTFd
724 a
Device ID
0x110103 (1114371)
Switching frequency
1000 Hz
Housing height
36.5 mm
Detection range
2 ... 800 mm
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K

OBD800-R103-2EP-IO-0,3M-V1 Related Documents