OBD800-R103-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  20 ... 40 mm
• Ambient light limit
  EN 60947-5-2
• SIO mode support
  yes
• Usage category
  DC-12 and DC-13
• Degree of protection
  IP67 / IP69 / IP69K
• MTTFd
  724 a
• Protection class
  III
• Switching current
  max. 100 mA , resistive load
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Cable length
  2 m
• Reference target
  standard white, 100 mm x 100 mm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Device ID
  0x110103 (1114371)
• Response time
  0.5 ms
• Housing width
  15 mm
• Mass
  approx. 38 g
• LED risk group labelling
  exempt group
• Control elements
  Light-on/dark-on changeover switch
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Switching frequency
  1000 Hz
Housing height
36.5 mm
Opening angle
3.7 °
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
Housing depth
26.7 mm
Adjustment range
40 ... 800 mm
Diagnostic Coverage (DC)
0 %
IO-Link revision
1.1
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Light type
modulated visible red light
Ripple
max. 10 %
Compatible master port type
A
Communication interface
IEC 61131-9
Housing
PC (Polycarbonate)
Light source
LED
Operating voltage
10 ... 30 V DC
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
Product standard
EN 60947-5-2
Connection
2 m fixed cable
Detection range
2 ... 800 mm
Mission Time (TM)
20 a
Interface type
IO-Link ( via C = pin 4 )
Min. cycle time
2.3 ms
EAC conformity
TR CU 020/2011
Optical face
PMMA
Diameter of the light spot
approx. 55 mm at a distance of 800 mm
No-load supply current
< 25 mA at 24 V supply voltage
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains

OBD800-R103-2EP-IO Related Documents