OBD800-R103-EP-IO-0,3M-V3 Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  2 ... 800 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Min. cycle time
  2.3 ms
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Diameter of the light spot
  approx. 55 mm at a distance of 800 mm
• IO-Link revision
  1.1
• Switching frequency
  1000 Hz
• Product standard
  EN 60947-5-2
• Housing
  PC (Polycarbonate)
• Light source
  LED
• Ripple
  max. 10 %
• Switching current
  max. 100 mA , resistive load
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Mass
  approx. 17 g
• Ambient light limit
  EN 60947-5-2
• No-load supply current
  < 25 mA at 24 V supply voltage
• Voltage drop
  ≤ 1.5 V DC
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Cable length
  0.3 m
Opening angle
3.7 °
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Degree of protection
IP67 / IP69 / IP69K
Detection range min.
20 ... 40 mm
Diagnostic Coverage (DC)
0 %
Protection class
III
Compatible master port type
A
Response time
0.5 ms
Housing width
15 mm
LED risk group labelling
exempt group
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Reference target
standard white, 100 mm x 100 mm
Mission Time (TM)
20 a
Device ID
0x110103 (1114371)
Switching voltage
max. 30 V DC
Housing depth
26.7 mm
Light type
modulated visible red light
MTTFd
724 a
Interface type
IO-Link ( via C = pin 4 )
Usage category
DC-12 and DC-13
EAC conformity
TR CU 020/2011
Optical face
PMMA
Adjustment range
40 ... 800 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Transfer rate
COM2 (38.4 kBit/s)
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Housing height
36.5 mm

OBD800-R103-EP-IO-0,3M-V3 Related Documents