OBD800-R103-2EP-IO-V31 Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  standard white, 100 mm x 100 mm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Optical face
  PMMA
• Detection range
  2 ... 800 mm
• Interface type
  IO-Link ( via C = pin 4 )
• Compatible master port type
  A
• Communication interface
  IEC 61131-9
• Degree of protection
  IP67 / IP69 / IP69K
• Opening angle
  3.7 °
• Control elements
  Light-on/dark-on changeover switch
• SIO mode support
  yes
• Response time
  0.5 ms
• Connection
  M8 x 1 connector, 4-pin
• Ambient light limit
  EN 60947-5-2
• Protection class
  III
• Switching voltage
  max. 30 V DC
• EAC conformity
  TR CU 020/2011
LED risk group labelling
exempt group
No-load supply current
< 25 mA at 24 V supply voltage
Switching current
max. 100 mA , resistive load
Housing width
15 mm
Light source
LED
Diagnostic Coverage (DC)
0 %
Ripple
max. 10 %
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Detection range min.
20 ... 40 mm
Mission Time (TM)
20 a
IO-Link revision
1.1
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F)
Housing
PC (Polycarbonate)
Diameter of the light spot
approx. 55 mm at a distance of 800 mm
Device ID
0x110103 (1114371)
Voltage drop
≤ 1.5 V DC
Housing height
43.9 mm
Light type
modulated visible red light
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching frequency
1000 Hz
Housing depth
26.7 mm
Adjustment range
40 ... 800 mm
MTTFd
724 a
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Product standard
EN 60947-5-2
Mass
approx. 12 g

OBD800-R103-2EP-IO-V31 Related Documents