PS116-Z11-LR200-K200 Schmersal Safety Switches

Product Details

• Switching frequency
  5,000 /h
• Switchover time, maximum
  5.5 ms
• Gross weight
  150 g
• Mechanical life, minimum
  10,000,000 Operations
• Length of sensor
  16.6 mm
• Rated impulse withstand voltage Uimp
  4 kV
• Material of the contacts, electrical
  Silver
• Number of safety contacts
  1
• Terminal (mechanical)
  right
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated
• Actuating element
  Offset roller lever K200
• Number of auxiliary contacts
  1
• Terminal Connector
  Cable, 4-pole
• Actuating speed, maximum
  1 m/s
• Positive break torque
  0.6 Nm
• Height of sensor
  83.6 mm
• Diameter of Castor
  12 mm
• Degree of protection
  IP66, IP67
• Housing construction form
  Norm construction design
• Positive break force, minimum
  40 N
Cable type
LiYY
Thermal test current
5 A
Safety functions
Yes
Actuating force, minimum
7.5 N
Length of cable
2 m
Actuator type to DIN EN 50047
e
Actuating torque, minimum
0.2 Nm
Width of sensor
31 mm
Ambient temperature, maximum
+80 °C
Rated insulation voltage Ui
300 V
Switching element
NO contact, NC contact
Bounce duration, maximum
3 ms
Actuating speed, minimum
24 mm/min
Standards
IEC 60947-5-1
Wire cross-section
0.5 mm2
Ambient temperature, minimum
-30 °C
Required rated short-circuit current to EN 60947-5-1
400 A
Switching principle
Snap switch element
Utilisation category DC-13
1.5 A
Utilisation category AC-15
3 A

PS116-Z11-LR200-K200 Related Documents