PS116-T11-L200-H200 Schmersal Safety Switches

Product Details

• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, zinc die-cast, chromated
• Standards
  IEC 60947-5-1
• Length of cable
  2 m
• Length of the lever
  24 mm
• Utilisation category AC-15
  3 A
• Bounce duration, maximum
  3 ms
• Safety functions
  Yes
• Actuating element
  Roller lever H200
• Wire cross-section
  0.5 mm2
• Rated impulse withstand voltage Uimp
  4 kV
• Actuator type to DIN EN 50047
  A
• Terminal (mechanical)
  bottom
• Number of safety contacts
  1
• Mechanical life, minimum
  10,000,000 Operations
• Terminal Connector
  Cable, 4-pole
• Width of sensor
  31 mm
• Cable type
  LiYY
• Degree of protection
  IP66, IP67
• Switching element
  NO contact, NC contact
• Utilisation category DC-13
  1.5 A
Switching frequency
5,000 /h
Number of auxiliary contacts
1
Actuating speed, maximum
1 m/s
Ambient temperature, minimum
-30 °C
Gross weight
225.9 g
Actuating speed, minimum
492 mm/min
Length of sensor
16.6 mm
Rated insulation voltage Ui
300 V
Required rated short-circuit current to EN 60947-5-1
1,000 A
Material of the contacts, electrical
Silver
Positive break torque
0.6 Nm
Height of sensor
101 mm
Ambient temperature, maximum
+80 °C
Switchover time, maximum
5.5 ms
Housing construction form
Norm construction design
Actuating torque, minimum
0.2 Nm
Diameter of Castor
16 mm
Thermal test current
5 A
Switching principle
Creep circuit element

PS116-T11-L200-H200 Related Documents