AZM300B-ST-1P2P Schmersal Safety Switches

Product Details

• Frequency band RFID
  125 kHz
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Series-wiring
  Yes
• Tightening torque of the fixing screws, minimum
  6 Nm
• Width of sensor
  87.5 mm
• Restistance to shock
  30 g / 11 ms
• Degree of pollution to IEC/EN 60664-1
  3
• External wiring and device fuse rating
  2 A gG
• Voltage, Utilisation category DC13
  24 VDC
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• Latching
  Yes
• Number of fail-safe digital outputs
  2
• Type of the fixing screws
  2x M6
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Note (Relative humidity)
  non-condensing, non-icing
• Operating voltage, minimum
  20.4 VDC
• Duty cycle solenoid
  100 %
• Transmit power, maximum
  -6 dB/m
• Manual release
  Yes
• Mechanical life, minimum
  1,000,000 Operations
Ensured switch distance ON Sao
1 mm
Length of sensor chain, maximum
200 m
Ambient temperature, maximum
+60 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Required rated short-circuit current to EN 60947-5-1
100 A
Classification ZVEI CB24I, Source
C2
Versions
short-circuit proof, p-type
general information
Universal coding
Power to unlock
Yes
Safety functions
Yes
Clamping force, maximum Fmax
1,500 N
Ensured switch distance OFF Sar
20 mm
Ambient temperature, minimum
+0 °C
Rated insulation voltage Ui
32 VDC
Current consumption with solenoid ON, peak
350 mA / 200 ms
Test pulse interval, minimum
100 ms
Test pulse interval, typical
1000 ms
Active principle
RFID
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Short circuit detection
Yes
Latching force, adjustable, position 1
25 N
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Storage and transport temperature, minimum
-10 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, average
200 mA
Classification ZVEI CB24I, Sink
C1, C2
Current, Utilisation category DC13
0.05 A
Time to readiness, maximum
5,000 ms
Short-circuit recognition
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Switch distance
2 mm
Height of sensor
35 mm
Protection rating
III
Notes (Power supply, general)
stabilised PELV power supply
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage, Utilisation category DC12
24 VDC
Coding level according to ISO 14119
Low
Gross weight
600 g
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Duration of risk, maximum
200 ms
Actuator monitored
Yes
Integral System Diagnostics, status
Yes
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Angular offset between interlocking device and actuator, maximum
2 °
Latching force, adjustable, position 2
50 N
Tightening torque for the fixing screws, maximum
7 Nm
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor
120 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Storage and transport temperature, maximum
+90 °C
Relative humidity, maximum
93 %
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Overvoltage category
III
Operating voltage, maximum
26.4 VDC
No-load supply current I0
100 mA
Switching frequency, maximum
0.5 Hz
Current consumption at 24V
5 mA
Current leakage Ir
0.5 mA
Test pulse duration, maximum
0.5 ms
Voltage drop Ud, maximum
4 V
Current, Utilisation category DC12
0.05 A

AZM300B-ST-1P2P Related Documents