AZM300Z-I2-ST-SD2P-T Schmersal Safety Switches

Product Details

• Frequency band RFID
  125 kHz
• Coding level according to ISO 14119
  High
• Active principle
  RFID
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• general information
  Individual coding, multiple teaching
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Transmit power, maximum
  -6 dB/m
• Gross weight
  660.1 g
• Duration of risk, maximum
  200 ms
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Time to readiness, maximum
  5,000 ms
• Power to unlock
  Yes
• Guard locking monitored
  Yes
• Latching
  Yes
• Serial diagnostics
  Yes
• Short circuit detection
  Yes
• Emergency exit
  Yes
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Short-circuit recognition
  Yes
• Safety functions
  Yes
Series-wiring
Yes
Integral System Diagnostics, status
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Mechanical life, minimum
1,000,000 Operations
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Latching force, adjustable, position 1
25 N
Latching force, adjustable, position 2
50 N
Type of the fixing screws
2x M6
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Relative humidity, maximum
93 %
Overvoltage category
III
External wiring and device fuse rating
2 A gG
Operation current
150 mA
Voltage, Utilisation category DC13
24 VDC
Tightening torque for the fixing screws, maximum
7 Nm
Storage and transport temperature, minimum
-10 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, average
200 mA
Current consumption at 24V
5 mA
Tightening torque of the fixing screws, minimum
6 Nm
Height of sensor
55 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating voltage, minimum
20.4 VDC
Test pulse duration, maximum
0.5 ms
Number of fail-safe digital outputs
2
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Required rated short-circuit current to EN 60947-5-1
100 A
Test pulse interval, minimum
100 ms
Angular offset between interlocking device and actuator, maximum
2 °
Terminal Connector
Connector M12, 8-pole, A-coded
Note (Relative humidity)
non-condensing, non-icing
Degree of pollution to IEC/EN 60664-1
3
Current consumption with solenoid ON, peak
350 mA / 200 ms
Ensured switch distance OFF Sar
20 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Test pulse interval, typical
1000 ms
Length of sensor
146 mm
Ambient temperature, minimum
+0 °C
Rated insulation voltage Ui
32 VDC
Operating voltage, maximum
26.4 VDC
No-load supply current I0
100 mA
Wiring capacity
50 nF
Width of sensor
87.5 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Restistance to shock
30 g / 11 ms
Classification ZVEI CB24I, Source
C2
Current, Utilisation category DC12
0.05 A
Storage and transport temperature, maximum
+90 °C
Switching frequency, maximum
0.5 Hz
Current leakage Ir
0.5 mA
Classification ZVEI CB24I, Sink
C1, C2
Clamping force, maximum Fmax
1,500 N
Ensured switch distance ON Sao
1 mm
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage drop Ud, maximum
4 V
Current, Utilisation category DC13
0.05 A
Switch distance
2 mm
Length of sensor chain, maximum
200 m
Ambient temperature, maximum
+60 °C
Protection rating
III
Notes (Power supply, general)
stabilised PELV power supply
Duty cycle solenoid
100 %
Voltage, Utilisation category DC12
24 VDC
Versions
short-circuit proof, p-type

AZM300Z-I2-ST-SD2P-T Related Documents