AZM300Z-I1-ST-1P2P-T Schmersal Safety Switches

Product Details

• Power to unlock
  Yes
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Active principle
  RFID
• Tightening torque of the fixing screws, minimum
  6 Nm
• Note (series connection of the sensors)
  Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
• Zulässige Aufstellhöhe über NN, maximum
  2,000 m
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Test pulse interval, minimum
  100 ms
• Versions
  short-circuit proof, p-type
• Latching force, adjustable, position 2
  50 N
• Gross weight
  647 g
• Frequency band RFID
  125 kHz
• Number of fail-safe digital outputs
  2
• Note (length of the sensor chain)
  Cable length and cross-section change the voltage drop dependiing on the output current
• Storage and transport temperature, minimum
  -10 °C
• Protection rating
  III
• Operating voltage, minimum
  20.4 VDC
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Test pulse interval, typical
  1000 ms
• Classification ZVEI CB24I, Sink
  C1, C2
Time to readiness, maximum
5,000 ms
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Integral System Diagnostics, status
Yes
Tightening torque for the fixing screws, maximum
7 Nm
Width of sensor
87.5 mm
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption at 24V
5 mA
Current leakage Ir
0.5 mA
Transmit power, maximum
-6 dB/m
general information
Individual coding
Guard locking monitored
Yes
Series-wiring
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Type of the fixing screws
2x M6
Note (Relative humidity)
non-condensing, non-icing
Current consumption with solenoid ON, average
200 mA
Duty cycle solenoid
100 %
Voltage drop Ud, maximum
4 V
Coding level according to ISO 14119
High
Emergency exit
Yes
Safety functions
Yes
Clamping force, maximum Fmax
1,500 N
Ensured switch distance ON Sao
1 mm
Length of sensor chain, maximum
200 m
Ambient temperature, minimum
+0 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Degree of pollution to IEC/EN 60664-1
3
External wiring and device fuse rating
2 A gG
Voltage, Utilisation category DC12
24 VDC
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Short circuit detection
Yes
Mechanical life, minimum
1,000,000 Operations
Latching force, adjustable, position 1
25 N
Terminal Connector
Connector M12, 8-pole, A-coded
Height of sensor
55 mm
Storage and transport temperature, maximum
+90 °C
Rated insulation voltage Ui
32 VDC
Notes (Power supply, general)
stabilised PELV power supply
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Voltage, Utilisation category DC13
24 VDC
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Duration of risk, maximum
200 ms
Latching
Yes
Ensured switch distance OFF Sar
20 mm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Relative humidity, maximum
93 %
Overvoltage category
III
No-load supply current I0
100 mA
Test pulse duration, maximum
0.5 ms
Current, Utilisation category DC12
0.05 A
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Short-circuit recognition
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Switch distance
2 mm
Length of sensor
146 mm
Ambient temperature, maximum
+60 °C
Restistance to shock
30 g / 11 ms
Operating voltage, maximum
26.4 VDC
Switching frequency, maximum
0.5 Hz
Classification ZVEI CB24I, Source
C2
Current, Utilisation category DC13
0.05 A

AZM300Z-I1-ST-1P2P-T Related Documents