AZM300B-ST-1P2P-N Schmersal Safety Switches

Product Details

• Integral System Diagnostics, status
  Yes
• general information
  Universal coding
• Ensured switch distance OFF Sar
  20 mm
• Ambient temperature, maximum
  +60 °C
• Degree of pollution to IEC/EN 60664-1
  3
• External wiring and device fuse rating
  2 A gG
• Test pulse interval, minimum
  100 ms
• Current, Utilisation category DC12
  0.05 A
• Actuator monitored
  Yes
• Safety functions
  Yes
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• Type of the fixing screws
  2x M6
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Note (Relative humidity)
  non-condensing, non-icing
• Operating voltage, minimum
  20.4 VDC
• Switching frequency, maximum
  0.5 Hz
• Duration of risk, maximum
  200 ms
• Short circuit detection
  Yes
• Latching force, adjustable, position 1
  25 N
• Length of sensor
  146 mm
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Storage and transport temperature, maximum
+90 °C
Rated impulse withstand voltage Uimp
0.8 kV
Current consumption with solenoid ON, peak
350 mA / 200 ms
Voltage drop Ud, maximum
4 V
Gross weight
650 g
Series-wiring
Yes
Active principle
RFID
Angular offset between interlocking device and actuator, maximum
2 °
Tightening torque for the fixing screws, maximum
7 Nm
Width of sensor
87.5 mm
Overvoltage category
III
Current consumption with solenoid ON, average
200 mA
Duty cycle solenoid
100 %
Voltage, Utilisation category DC12
24 VDC
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Short-circuit recognition
Yes
Mechanical life, minimum
1,000,000 Operations
Tightening torque of the fixing screws, minimum
6 Nm
Ambient temperature, minimum
+0 °C
Zulässige Aufstellhöhe über NN, maximum
2,000 m
No-load supply current I0
100 mA
Classification ZVEI CB24I, Source
C2
Current, Utilisation category DC13
0.05 A
Latching
Yes
Frequency band RFID
125 kHz
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Length of sensor chain, maximum
200 m
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Storage and transport temperature, minimum
-10 °C
Protection rating
III
Required rated short-circuit current to EN 60947-5-1
100 A
Current leakage Ir
0.5 mA
Test pulse duration, maximum
0.5 ms
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Latching force, adjustable, position 2
50 N
Ensured switch distance ON Sao
1 mm
Relative humidity, maximum
93 %
Restistance to shock
30 g / 11 ms
Notes (Power supply, general)
stabilised PELV power supply
Test pulse interval, typical
1000 ms
Time to readiness, maximum
5,000 ms
Clamping force in accordance with ISO14119 Fzh
1,150 N
Power to unlock
Yes
Number of fail-safe digital outputs
2
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Rated insulation voltage Ui
32 VDC
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC13
24 VDC
Switch distance
2 mm
Transmit power, maximum
-6 dB/m
Emergency release
Yes
Coding level according to ISO 14119
Low
Clamping force, maximum Fmax
1,500 N
Height of sensor
55 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Operating voltage, maximum
26.4 VDC
Current consumption at 24V
5 mA
Versions
short-circuit proof, p-type

AZM300B-ST-1P2P-N Related Documents