AZM300B-ST-1P2P-A Schmersal Safety Switches

Product Details

• Time to readiness, maximum
  5,000 ms
• Duration of risk, maximum
  200 ms
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Note (length of the sensor chain)
  Cable length and cross-section change the voltage drop dependiing on the output current
• Note (Relative humidity)
  non-condensing, non-icing
• No-load supply current I0
  100 mA
• Current leakage Ir
  0.5 mA
• Coding level according to ISO 14119
  Low
• Frequency band RFID
  125 kHz
• Transmit power, maximum
  -6 dB/m
• Active principle
  RFID
• Gross weight
  600 g
• general information
  Universal coding
• Standards
  IEC 61508, IEC 60947-5-3, EN ISO 13849-1
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Manual release
  Yes
• Actuator monitored
  Yes
• Power to lock
  Yes
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
Latching
Yes
Short-circuit recognition
Yes
Mechanical life, minimum
1,000,000 Operations
Short circuit detection
Yes
Series-wiring
Yes
Safety functions
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Integral System Diagnostics, status
Yes
Clamping force in accordance with ISO14119 Fzh
1,150 N
Number of fail-safe digital outputs
2
Clamping force, maximum Fmax
1,500 N
Latching force, adjustable, position 1
25 N
Tightening torque for the fixing screws, maximum
7 Nm
Latching force, adjustable, position 2
50 N
Tightening torque of the fixing screws, minimum
6 Nm
Ensured switch distance ON Sao
1 mm
Switch distance
2 mm
Type of the fixing screws
2x M6
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Length of sensor chain, maximum
200 m
Ensured switch distance OFF Sar
20 mm
Relative humidity, maximum
93 %
Degree of pollution to IEC/EN 60664-1
3
Current consumption with solenoid ON, peak
350 mA / 200 ms
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC12
24 VDC
Terminal Connector
Connector M12, 8-pole, A-coded
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Protection rating
III
Current consumption with solenoid ON, average
200 mA
Test pulse interval, typical
1000 ms
Length of sensor
120 mm
Ambient temperature, maximum
+60 °C
Rated insulation voltage Ui
32 VDC
Switching frequency, maximum
0.5 Hz
Test pulse interval, minimum
100 ms
Versions
short-circuit proof, p-type
Height of sensor
35 mm
Restistance to shock
30 g / 11 ms
Operating voltage, maximum
26.4 VDC
Duty cycle solenoid
100 %
Voltage, Utilisation category DC13
24 VDC
Width of sensor
87.5 mm
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Notes (Power supply, general)
stabilised PELV power supply
Test pulse duration, maximum
0.5 ms
Current, Utilisation category DC13
0.05 A
Ambient temperature, minimum
+0 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Rated impulse withstand voltage Uimp
0.8 kV
Required rated short-circuit current to EN 60947-5-1
100 A
Current consumption at 24V
5 mA
Current, Utilisation category DC12
0.05 A
Storage and transport temperature, maximum
+90 °C
Overvoltage category
III
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Classification ZVEI CB24I, Source
C2
Storage and transport temperature, minimum
-10 °C
Operating voltage, minimum
20.4 VDC
External wiring and device fuse rating
2 A gG
Voltage drop Ud, maximum
4 V

AZM300B-ST-1P2P-A Related Documents