AZM201Z-ST-T-1P2PW-A-2965-1 Schmersal Safety Switches

Product Details

• general information
  Universal coding
• Duration of risk, maximum
  200 ms
• Active principle
  RFID
• Power to lock
  Yes
• Freely assignable LED
  Yes
• Number of Series-wiring of sensors
  31
• Terminal Connector
  Connector M23, 12-pole
• Wire cross-section, maximum
  15 AWG
• Storage and transport temperature, maximum
  +85 °C
• Ambient temperature, maximum
  +60 °C
• Rated insulation voltage Ui
  32 VDC
• Rated impulse withstand voltage Uimp
  0.8 kV
• No-load supply current I0
  50 mA
• Current consumption with solenoid ON, peak
  700 mA / 100 ms
• Time to readiness, maximum
  4,000 ms
• Gross weight
  610 g
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Short-circuit recognition
  Yes
• Safety functions
  Yes
• Clamping force in accordance with ISO14119 Fzh
  2,000 N
Actuating speed, maximum
0.2 m/s
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Height of sensor
220 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Protection rating
III
Operating voltage, minimum
20.4 VDC
Current consumption with solenoid ON, average
200 mA
Current, Utilisation category DC13
0.05 A
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Current leakage Ir
0.5 mA
Classification ZVEI CB24I, Sink
C1, C2
Enclosure material
Glass-fibre, reinforced thermoplastic
Guard locking monitored
Yes
Integral System Diagnostics, status
Yes
Clamping force, maximum Fmax
2,600 N
Length of sensor
50 mm
Relative humidity, maximum
95 %
Degree of pollution to VDE 0100
3
Voltage drop Ud, maximum
4 V
Standards
IEC 60947-5-1, EN ISO 13849-1, IEC 61508
Idle assignable pushbutton
Yes
Latching force
30 N
Ambient temperature, minimum
-25 °C
Relative humidity, minimum
30 %
Overvoltage category
III
Switching frequency, approx.
1 Hz
Voltage, Utilisation category DC13
24 VDC
Coding level according to ISO 14119
Low
Short circuit detection
Yes
Mechanical life, minimum
1,000,000 Operations
Width of sensor
40 mm
Note (Relative humidity)
non-condensing
Operating voltage, maximum
26.4 VDC
Classification ZVEI CB24I, Source
C2
Response time safety outputs in case of switch-off by actuator, maximum
100 ms
Manual release
Yes
Number of safety contacts
2
Wire cross-section, minimum
23 AWG
Storage and transport temperature, minimum
-25 °C
Restistance to shock
30 g / 11 ms
Rated operating current (safety outputs)
250 mA
Operating current
50 mA

AZM201Z-ST-T-1P2PW-A-2965-1 Related Documents