AZM201BZ-I1-ST-T-AS-A-P Schmersal Safety Switch Interlocks

Product Details

• Gross weight
  540.6 g
• Coding level according to ISO 14119
  High
• Actuator and interlock combined monitored
  Yes
• Actuating speed, maximum
  0.2 m/s
• Storage and transport temperature, minimum
  -25 °C
• Overvoltage category
  III
• AS-i Version
  V 3.0
• AS-i Outputs, DO 3
  No Function
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
• general information
  Individual coding
• Latching
  Yes
• Clamping force, maximum Fmax
  2,600 N
• Ambient temperature, minimum
  -25 °C
• Degree of pollution to IEC/EN 60664-1
  3
• AS-i, ID-Code
  0xB
• AS-i, ID-Code2
  0xE
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• Active principle
  RFID
• Time to readiness, maximum
  4,000 ms
• Mechanical life, minimum
  1,000,000 Operations
Width of sensor
40 mm
Relative humidity, maximum
95 %
Rated insulation voltage Ui
32 VDC
AS-i Profile
S-7.B.F.E
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Duration of risk, maximum
200 ms
Integral System Diagnostics, status
Yes
Tightening torque for the fixing screws, maximum
8 Nm
Relative humidity, minimum
10 %
Protection rating
III
AS-i Current consumption, maximum
100 mA
AS-i Parameter bits, P0
Safety guard and actuator detected
Reaction time, maximum
100 ms
Power to lock
Yes
Safety functions
Yes
Terminal Connector
Connector plug M12, 4-pole, (A-coding)
Height of sensor
220 mm
Note (Relative humidity)
non-condensing, non-icing
AS-i Operating voltage, minimum
26.5 VDC
AS-i Specification
Safety-Slave
AS-i Parameter bits, P1
Solenoid interlock locked
Operating current
500 mA
Enclosure material
Glass-fibre, reinforced thermoplastic
Number of actuating directions
2
Length of sensor
50 mm
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
AS-i, IO-Code
0x7
AS-i Outputs, DO 1
No Function
AS-i Parameter bits, P3
Internal device error (FID)
Standards
EN ISO 13849-1, IEC 61508, IEC 60947-5-3
Clamping force in accordance with ISO14119 Fzh
2,000 N
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Restistance to shock
30 g / 11 ms
Switching frequency, maximum
1 Hz
AS-i, ID-Code1
0xF
AS-i Outputs, DO 0
Solenoid control
AS-i Input module address
0
Manual release
Yes
Latching force
30 N
Storage and transport temperature, maximum
+85 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Note (AS-i Parameter bits)
FID: periphery error
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Outputs, DO 2
No Function

AZM201BZ-I1-ST-T-AS-A-P Related Documents