AZM201Z-SK-T-SD2P Schmersal Safety Switches

Product Details

• Enclosure material
  Glass-fibre, reinforced thermoplastic
• general information
  Universal coding
• Manual release
  Yes
• Coding level according to ISO 14119
  Low
• Response time safety outputs in case of switch-off by safety inputs, maximum
  0.5 ms
• Short circuit detection
  Yes
• Clamping force in accordance with ISO14119 Fzh
  2,000 N
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
• Note (Relative humidity)
  non-condensing
• Degree of pollution to VDE 0100
  3
• Current leakage Ir
  0.5 mA
• Classification ZVEI CB24I, Source
  C2
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Duration of risk, maximum
  200 ms
• Number of safety contacts
  2
• Clamping force, maximum Fmax
  2,600 N
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Storage and transport temperature, minimum
  -25 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
Mechanical life, minimum
1,000,000 Operations
Gross weight
585 g
Serial diagnostics
Yes
Wire cross-section, maximum
15 AWG
Storage and transport temperature, maximum
+85 °C
Overvoltage category
III
Voltage, Utilisation category DC13
24 VDC
Time to readiness, maximum
4,000 ms
Guard locking monitored
Yes
Integral System Diagnostics, status
Yes
Cable section, maximum
1.5 mm²
Ambient temperature, maximum
+60 °C
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Current consumption with solenoid ON, peak
700 mA / 100 ms
Rated operating current (safety outputs)
250 mA
Active principle
RFID
Short-circuit recognition
Yes
Terminal Connector
Screw connection
Width of sensor
40 mm
Restistance to shock
30 g / 11 ms
No-load supply current I0
50 mA
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-1
Series-wiring
Yes
Latching force
30 N
Length of sensor
50 mm
Relative humidity, minimum
30 %
Operating voltage, minimum
20.4 VDC
Switching frequency, approx.
1 Hz
Power to unlock
Yes
Safety functions
Yes
Actuating speed, maximum
0.2 m/s
Wire cross-section, minimum
23 AWG
Relative humidity, maximum
95 %
Operating voltage, maximum
26.4 VDC
Classification ZVEI CB24I, Sink
C1, C2
Number of Series-wiring of sensors
31
Height of sensor
220 mm
Rated insulation voltage Ui
32 VDC
Operating current
50 mA
Cable section, minimum
0.25 mm²
Ambient temperature, minimum
-25 °C
Protection rating
III
Current consumption with solenoid ON, average
200 mA
Current, Utilisation category DC13
0.05 A
Voltage drop Ud, maximum
4 V

AZM201Z-SK-T-SD2P Related Documents