AZM201B-SK-T-1P2PW-A Schmersal Safety Switches

Product Details

• Coding level according to ISO 14119
  Low
• Duration of risk, maximum
  200 ms
• Gross weight
  588 g
• general information
  Universal coding
• Enclosure material
  Glass-fibre, reinforced thermoplastic
• Standards
  IEC 60947-5-1, EN ISO 13849-1, IEC 61508
• Current leakage Ir
  0.5 mA
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Cable section, minimum
  0.25 mm²
• Wire cross-section, minimum
  23 AWG
• Storage and transport temperature, minimum
  -25 °C
• No-load supply current I0
  50 mA
• Classification ZVEI CB24I, Source
  C2
• Time to readiness, maximum
  4,000 ms
• Safety functions
  Yes
• Latching force
  30 N
• Height of sensor
  220 mm
• Restistance to shock
  30 g / 11 ms
• Power to lock
  Yes
• Actuating speed, maximum
  0.2 m/s
Length of sensor
50 mm
Relative humidity, minimum
30 %
Current consumption with solenoid ON, average
200 mA
Actuator monitored
Yes
Number of safety contacts
2
Terminal Connector
Screw connection
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Rated insulation voltage Ui
32 VDC
Switching frequency, approx.
1 Hz
Current, Utilisation category DC13
0.05 A
Active principle
RFID
Integral System Diagnostics, status
Yes
Cable section, maximum
1.5 mm²
Ambient temperature, maximum
+60 °C
Degree of pollution to VDE 0100
3
Operating current
50 mA
Voltage drop Ud, maximum
4 V
Series-wiring
Yes
Clamping force, maximum Fmax
2,600 N
Ambient temperature, minimum
-25 °C
Note (Relative humidity)
non-condensing
Operating voltage, maximum
26.4 VDC
Protection rating
III
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Current consumption with solenoid ON, peak
700 mA / 100 ms
Short-circuit recognition
Yes
Mechanical life, minimum
1,000,000 Operations
Wire cross-section, maximum
15 AWG
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Rated impulse withstand voltage Uimp
0.8 kV
Manual release
Yes
Short circuit detection
Yes
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Storage and transport temperature, maximum
+85 °C
Operating voltage, minimum
20.4 VDC
Rated operating current (safety outputs)
250 mA
Response time safety outputs in case of switch-off by safety inputs, maximum
0.5 ms
Clamping force in accordance with ISO14119 Fzh
2,000 N
Width of sensor
40 mm
Relative humidity, maximum
95 %
Overvoltage category
III
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC13
24 VDC

AZM201B-SK-T-1P2PW-A Related Documents