AES 1136 Schmersal Electronic Components

Product Details

• EMC rating
  EMC-Directive
• Input signal, LOW Signal 0
  0 … 2 VDC
• Conduction resistance, maximum
  40 Ω
• Switching capacity, minimum
  10 VDC
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Switching capacity, maximum
  2 A
• Pull-in delay at RESET, typically
  20 ms
• Voltage, Utilisation category DC13
  24 VDC
• Drop-out delay in case of emergency, typically
  20 ms
• Voltage, Utilisation category AC15
  230 VAC
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Drop-out delay in case of power failure, typically
  80 ms
• Note (Contact resistance)
  in new state
• Rated AC voltage for controls at DC minimum
  20.4 VDC
• Rated AC voltage for controls, 60 Hz, minimum
  20.4 VAC
• Rated operating voltage
  24 VAC -15% / +10%, 24 VDC -10%/+20%, residual ripple max. 10%
• Rated control voltage at AC 50 Hz, maximum
  26.4 VAC
• Rated AC voltage for controls, 50 Hz, minimum
  20.4 VAC
• Thermal test current
  6 A
• Rated impulse withstand voltage Uimp
  4 kV
Restistance to shock
30 g / 11 ms
Storage and transport temperature, maximum
+70 °C
Ambient temperature, maximum
+55 °C
Degree of protection of clips or terminals
IP20
Degree of protection of the enclosure
IP40
Width
22.5 mm
Cable section, maximum
2.5 mm²
Cable section, minimum
0.25 mm²
Terminal designations
IEC/EN 60947-1
Terminal Connector
Screw connection, rigid or flexible
Mechanical life, minimum
20,000,000 Operations
Number of safety contacts
1
Number of shutters
1
Integral System Diagnostics, status
Yes
Earth connection detection
Yes
Material of the contacts, electrical
Ag-Ni 10 and 0.2 µm gold-plated
Gross weight
155 g
Voltage, Utilisation category DC12
24 VDC
Current, Utilisation category DC12
0.1 A
Current, Utilisation category DC13
6 A
Current, Utilisation category AC-15
6 A
Electrical power consumption
5 W
Contact resistance, maximum
0.1 Ω
Rated control voltage at DC, maximum
28.8 VDC
Rated control voltage at AC 60 Hz, maximum
26.4 VAC
Frequency range
50 Hz, 60 Hz
Degree of pollution to IEC/EN 60664-1
2
Overvoltage category
III
Resistance to vibrations to EN 60068-2-6
10...55 Hz, Amplitude 0.35 mm, ± 15 %
Storage and transport temperature, minimum
-25 °C
Ambient temperature, minimum
+0 °C
Degree of protection of the mounting space
IP54
Depth
121 mm
Height
100 mm
Tightening torque of Clips
0.6 Nm
Mounting
Snaps onto standard DIN rail to EN 60715
Number of signalling outputs
2
Number of openers
2
Number of LEDs
1
Number of undelayed semi-conductor outputs with signaling function
2
Start-up test
Yes
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Short-circuit recognition
Yes
Automatic reset function
Yes
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Wire breakage detection
Yes
Stop-Category
0

AES 1136 Related Documents