AES 1102.2 230 VAC Schmersal Electronic Components

Product Details

• Stop-Category
  0
• Integral System Diagnostics, status
  Yes
• Cable section, maximum
  2.5 mm²
• Degree of protection of clips or terminals
  IP20
• Rated control voltage at AC 50 Hz, maximum
  253 VAC
• Pull-in delay at automatic start, maximum, typically
  100 ms
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Gross weight
  160 g
• Width
  22.5 mm
• Degree of protection of the enclosure
  IP40
• Frequency range
  50 Hz, 60 Hz
• Drop-out delay in case of emergency, typically
  20 ms
• Number of LEDs
  1
• Mechanical life, minimum
  3,000,000 Operations
• Depth
  110 mm
• Resistance to vibrations to EN 60068-2-6
  10...55 Hz, Amplitude 0.35 mm, ± 15 %
• Rated control voltage at AC 60 Hz, maximum
  253 VAC
• Rated AC voltage for controls, 50 Hz, minimum
  195.5 VAC
• Current, Utilisation category AC-15
  1.5 A
• Voltage, Utilisation category DC12
  24 VDC
Wire breakage detection
Yes
Number of safety contacts
1
Height
75 mm
Storage and transport temperature, maximum
+70 °C
Restistance to shock
30 g / 11 ms
Number of openers
4
Tightening torque of Clips
0.6 Nm
Storage and transport temperature, minimum
-25 °C
Rated operating voltage
230 V
Electrical power consumption
2.4 W
Current, Utilisation category DC13
1 A
Automatic reset function
Yes
Climatic stress
EN 60068-2-3, BG-GS-ET-14
Terminal designations
IEC/EN 60947-1
Ambient temperature, minimum
+0 °C
Degree of pollution to IEC/EN 60664-1
2
Drop-out delay in case of power failure, typically
80 ms
Standards
IEC/EN 60204-1, IEC 60947-5-3, BG-GS-ET-14
Reset after disconnection of supply voltage
Yes
Mounting
Snaps onto standard DIN rail to EN 60715
Degree of protection of the mounting space
IP54
Rated impulse withstand voltage Uimp
4 kV
Overvoltage category
III
Pull-in delay at RESET, typically
20 ms
Switching capacity, minimum
10 mA
Material of the contacts, electrical
AgCdO
Number of shutters
2
Terminal Connector
Screw connection, rigid or flexible
Ambient temperature, maximum
+55 °C
Thermal test current
4 A
Contact resistance, maximum
0.1 Ω
Note (Contact resistance)
in new state
EMC rating
EMC-Directive
Voltage, Utilisation category AC15
250 VAC
Switching capacity, maximum
24 VDC
Conduction resistance, maximum
40 Ω
Voltage, Utilisation category DC13
24 VDC
Current, Utilisation category DC12
0.1 A
Rated AC voltage for controls, 60 Hz, minimum
195.5 VAC

AES 1102.2 230 VAC Related Documents