OBT650-R201-2EP-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  10 ... 650 mm
• Operating voltage
  10 ... 30 V DC
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Switching voltage
  max. 30 V DC
• Response time
  1 ms
• Degree of protection
  IP67 / IP69 / IP69K
• LED risk group labelling
  exempt group
• MTTFd
  600 a
• Switching current
  max. 100 mA , resistive load
• Mass
  approx. 55 g
• Light type
  modulated visible red light
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• Device ID
  0x111611 (1119761)
• Voltage drop
  ≤ 1.5 V DC
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Black-white difference (6 %/90 %)
  < 6 % at 650 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Min. cycle time
  2.3 ms
• Compatible master port type
  A
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
Light source
LED
Mission Time (TM)
20 a
No-load supply current
< 25 mA at 24 V supply voltage
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Housing height
61.7 mm
Reference target
standard white, 100 mm x 100 mm
Opening angle
approx. 2 °
Ripple
max. 10 %
SIO mode support
yes
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Diameter of the light spot
approx. 20 mm x 20 mm at a distance of 650 mm
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Housing width
15 mm
Detection range min.
10 ... 100 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
IO-Link revision
1.1
Switching frequency
500 Hz
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
0.3 m
Detection range max.
10 ... 650 mm
Diagnostic Coverage (DC)
0 %
Protection class
III
Transfer rate
COM2 (38.4 kBit/s)
Product standard
EN 60947-5-2
Housing depth
41.7 mm
Adjustment range
100 ... 650 mm
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Usage category
DC-12 and DC-13
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing
PC (Polycarbonate)

OBT650-R201-2EP-IO-0,3M-V1 Related Documents