OBT600-R200-2EP-IO-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  40 ... 90 mm
• Pulse length
  3 µs
• Opening angle
  approx. 0.3 °
• MTTFd
  560 a
• Ripple
  max. 10 %
• No-load supply current
  < 15 mA at 24 V supply voltage
• Device ID
  0x111603 (1119747)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Switching frequency
  1650 Hz
• Product standard
  EN 60947-5-2
• Adjustment range
  90 ... 600 mm
• Detection range max.
  40 ... 600 mm
• max. pulse energy
  10.4 nJ
• Mission Time (TM)
  20 a
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Protection class
  III
• Min. cycle time
  2.3 ms
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
• Reference target
  standard white, 100 mm x 100 mm
• Wave length
  680 nm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Compatible master port type
A
Switching current
max. 100 mA , resistive load
Response time
300 µs
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing width
15 mm
Laser safety
EN 60825-1:2014
Degree of protection
IP67 / IP69 / IP69K
Mass
approx. 74 g
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing depth
41.7 mm
Cable length
2 m
Light source
laser diode
Diameter of the light spot
approx. 2.5 mm at a distance of 600 mm
IO-Link revision
1.1
SIO mode support
yes
Communication interface
IEC 61131-9
Housing height
50.6 mm
Light type
modulated visible red light
Black-white difference (6 %/90 %)
< 5 % at 300 mm
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
EAC conformity
TR CU 020/2011
Connection
2 m fixed cable
Detection range
40 ... 600 mm
Repetition rate
approx. 13 kHz
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Laser class
1
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
Diagnostic Coverage (DC)
0 %
Operating voltage
10 ... 30 V DC
Transfer rate
COM2 (38.4 kBit/s)
Interface type
IO-Link ( via C/Q = BK )
Switching voltage
max. 30 V DC
Usage category
DC-12 and DC-13
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing
PC (Polycarbonate)
Optical face
PMMA

OBT600-R200-2EP-IO-L Related Documents