OBT650-R200-2EP-IO-V1 Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  10 ... 650 mm
• Black-white difference (6 %/90 %)
  < 6 % at 650 mm
• MTTFd
  600 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Diameter of the light spot
  approx. 20 mm x 20 mm at a distance of 650 mm
• Ripple
  max. 10 %
• Compatible master port type
  A
• EAC conformity
  TR CU 020/2011
• Optical face
  PMMA
• Degree of protection
  IP67 / IP69 / IP69K
• Control elements
  Light-on/dark-on changeover switch
• IO-Link revision
  1.1
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Device ID
  0x111601 (1119745)
• Voltage drop
  ≤ 1.5 V DC
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• Min. cycle time
  2.3 ms
Switching frequency
500 Hz
Housing depth
41.7 mm
Reference target
standard white, 100 mm x 100 mm
Opening angle
approx. 2 °
Detection range max.
10 ... 650 mm
Mission Time (TM)
20 a
No-load supply current
< 25 mA at 24 V supply voltage
Protection class
III
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Communication interface
IEC 61131-9
Product standard
EN 60947-5-2
Housing height
50.6 mm
Connection
4-pin, M12 x 1 connector, 90° rotatable
LED risk group labelling
exempt group
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Interface type
IO-Link ( via C/Q = pin 4 )
Switching voltage
max. 30 V DC
Usage category
DC-12 and DC-13
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 37 g
Light type
modulated visible red light
Adjustment range
100 ... 650 mm
Diagnostic Coverage (DC)
0 %
Detection range min.
10 ... 100 mm
Light source
LED
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Switching current
max. 100 mA , resistive load
Response time
1 ms
Housing width
15 mm
Housing
PC (Polycarbonate)

OBT650-R200-2EP-IO-V1 Related Documents