OBT650-R200-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Black-white difference (6 %/90 %)
  < 6 % at 650 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• No-load supply current
  < 25 mA at 24 V supply voltage
• Switching voltage
  max. 30 V DC
• Housing width
  15 mm
• Connection
  2 m fixed cable
• Detection range max.
  10 ... 650 mm
• MTTFd
  600 a
• Min. cycle time
  2.3 ms
• Switching frequency
  500 Hz
• Housing depth
  41.7 mm
• Opening angle
  approx. 2 °
• Ripple
  max. 10 %
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
• Communication interface
  IEC 61131-9
• Cable length
  2 m
• Light source
  LED
• Control elements
  Light-on/dark-on changeover switch
• Device ID
  0x111601 (1119745)
• Voltage drop
  ≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 74 g
Detection range min.
10 ... 100 mm
Diagnostic Coverage (DC)
0 %
Process data width
Process data input 1 Bit, Process data output 2 Bit
Response time
1 ms
Housing height
50.6 mm
LED risk group labelling
exempt group
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Transfer rate
COM2 (38.4 kBit/s)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Light type
modulated visible red light
Operating voltage
10 ... 30 V DC
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Usage category
DC-12 and DC-13
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Detection range
10 ... 650 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
Protection class
III
Compatible master port type
A
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Reference target
standard white, 100 mm x 100 mm
Diameter of the light spot
approx. 20 mm x 20 mm at a distance of 650 mm
IO-Link revision
1.1
Switching current
max. 100 mA , resistive load
CCC approval
CCC approval / marking not required for products rated ≤36 V
Optical face
PMMA
Adjustment range
100 ... 650 mm
Mission Time (TM)
20 a
Interface type
IO-Link ( via C/Q = BK )
SIO mode support
yes
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)

OBT650-R200-2EP-IO Related Documents