OBT600-R201-2EP-IO-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Wave length
  680 nm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Transfer rate
  COM2 (38.4 kBit/s)
• Communication interface
  IEC 61131-9
• Optical face
  PMMA
• Light type
  modulated visible red light
• Pulse length
  3 µs
• Diagnostic Coverage (DC)
  0 %
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
• Response time
  300 µs
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Light source
  laser diode
• MTTFd
  560 a
• IO-Link revision
  1.1
• Voltage drop
  ≤ 1.5 V DC
• Product standard
  EN 60947-5-2
• Housing
  PC (Polycarbonate)
• Laser class
  1
• max. pulse energy
  10.4 nJ
Control elements
Light-on/dark-on changeover switch
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Usage category
DC-12 and DC-13
Housing width
15 mm
Housing height
61.7 mm
Detection range max.
40 ... 600 mm
Repetition rate
approx. 13 kHz
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Switching current
max. 100 mA , resistive load
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 47 g
Adjustment range
90 ... 600 mm
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Mission Time (TM)
20 a
Ripple
max. 10 %
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Laser safety
EN 60825-1:2014
Housing depth
41.7 mm
Reference target
standard white, 100 mm x 100 mm
Opening angle
approx. 0.3 °
Device ID
0x111613 (1119763)
Switching frequency
1650 Hz
Degree of protection
IP67 / IP69 / IP69K
Detection range
40 ... 600 mm
Diameter of the light spot
approx. 2.5 mm at a distance of 600 mm
No-load supply current
< 15 mA at 24 V supply voltage
Compatible master port type
A
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Connection
4-pin, M12 x 1 connector, 90° rotatable
Detection range min.
40 ... 90 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
Protection class
III
SIO mode support
yes
CCC approval
CCC approval / marking not required for products rated ≤36 V
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Black-white difference (6 %/90 %)
< 5 % at 300 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching voltage
max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)

OBT600-R201-2EP-IO-V1-L Related Documents