OBT650-R200-EP-IO-V3-1T Pepperl + Fuchs Electronic Components

Product Details

• Adjustment range
  100 ... 650 mm
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Switching current
  max. 100 mA , resistive load
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Degree of protection
  IP67 / IP69 / IP69K
• Light type
  modulated visible red light
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• SIO mode support
  yes
• Communication interface
  IEC 61131-9
• Mass
  approx. 35 g
• Black-white difference (6 %/90 %)
  < 6 % at 650 mm
• Operating voltage
  10 ... 30 V DC
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Switching voltage
  max. 30 V DC
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Optical face
  PMMA
• LED risk group labelling
  exempt group
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• Control elements
  Light-on/dark-on changeover switch
• Device ID
  0x111701 (1120001)
Switching frequency
500 Hz
Housing depth
41.7 mm
Light source
LED
Diameter of the light spot
approx. 20 mm x 20 mm at a distance of 650 mm
No-load supply current
< 25 mA at 24 V supply voltage
Process data width
Process data input 1 Bit, Process data output 2 Bit
Voltage drop
≤ 1.5 V DC
Housing height
50.6 mm
Detection range
10 ... 650 mm
Mission Time (TM)
20 a
IO-Link revision
1.1
Compatible master port type
A
Response time
1 ms
Housing width
15 mm
Opening angle
approx. 2 °
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link,
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Reference target
standard white, 100 mm x 100 mm
MTTFd
600 a
Protection class
III
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Connection
Connector plug, M8 x 1, 3 pin, rotatable by 90°
Detection range min.
10 ... 100 mm
Diagnostic Coverage (DC)
0 %
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Detection range max.
10 ... 650 mm
Ripple
max. 10 %
Min. cycle time
2.3 ms
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),

OBT650-R200-EP-IO-V3-1T Related Documents