OBT600-R200-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Wave length
  680 nm
• Mission Time (TM)
  20 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Usage category
  DC-12 and DC-13
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Cable length
  0.3 m
• Light source
  laser diode
• Opening angle
  approx. 0.3 °
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Repetition rate
  approx. 13 kHz
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Device profile
  Identification and diagnosis, Smart Sensor type 2.4
• Laser class
  1
• Detection range max.
  40 ... 600 mm
• Detection range
  40 ... 600 mm
• max. pulse energy
  10.4 nJ
• Diameter of the light spot
  approx. 2.5 mm at a distance of 600 mm
• Light type
  modulated visible red light
• Diagnostic Coverage (DC)
  0 %
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching frequency
1650 Hz
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -20 ... 60 °C (-4 ... 140 °F) , movable cable not appropriate for conveyor chains
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 70000 Lux
IO-Link revision
1.1
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Optical face
PMMA
Beam divergence
> 5 mrad, d63 < 2,8 mm in the range of 350 mm ... 800 mm
Black-white difference (6 %/90 %)
< 5 % at 300 mm
Ripple
max. 10 %
Compatible master port type
A
Laser safety
EN 60825-1:2014
Pulse length
3 µs
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Response time
300 µs
Housing width
15 mm
Control elements
Light-on/dark-on changeover switch
Device ID
0x111603 (1119747)
Voltage drop
≤ 1.5 V DC
Housing height
50.6 mm
Mass
approx. 45 g
Protection class
III
Switching voltage
max. 30 V DC
Product standard
EN 60947-5-2
Housing depth
41.7 mm
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing
PC (Polycarbonate)
Switching current
max. 100 mA , resistive load
EAC conformity
TR CU 020/2011
Degree of protection
IP67 / IP69 / IP69K
Adjustment range
90 ... 600 mm
Detection range min.
40 ... 90 mm
MTTFd
560 a
No-load supply current
< 15 mA at 24 V supply voltage
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
CCC approval
CCC approval / marking not required for products rated ≤36 V
Connection
300 mm fixed cable with M12 x 1, 4-pin connector

OBT600-R200-2EP-IO-0,3M-V1-L Related Documents