OBT650-R200-2EP-IO-V1-1T Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Ambient light limit
  EN 60947-5-2 : 70000 Lux
• IO-Link revision
  1.1
• Compatible master port type
  A
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F),
• Communication interface
  IEC 61131-9
• Detection range
  10 ... 650 mm
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Housing width
  15 mm
• Connection
  4-pin, M12 x 1 connector, 90° rotatable
• Light source
  LED
• Diagnostic Coverage (DC)
  0 %
• Transfer rate
  COM2 (38.4 kBit/s)
• EAC conformity
  TR CU 020/2011
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Adjustment range
  100 ... 650 mm
• No-load supply current
  < 25 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Usage category
  DC-12 and DC-13
Housing height
50.6 mm
Diameter of the light spot
approx. 20 mm x 20 mm at a distance of 650 mm
Interface type
IO-Link ( via C/Q = pin 4 )
Device profile
Identification and diagnosis, Smart Sensor type 2.4
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Detection range min.
10 ... 100 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Switching voltage
max. 30 V DC
Voltage drop
≤ 1.5 V DC
Mass
approx. 37 g
Detection range max.
10 ... 650 mm
Opening angle
approx. 2 °
Ripple
max. 10 %
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing depth
41.7 mm
Reference target
standard white, 100 mm x 100 mm
Control elements
Light-on/dark-on changeover switch
Device ID
0x111701 (1120001)
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Black-white difference (6 %/90 %)
< 6 % at 650 mm
Mission Time (TM)
20 a
Protection class
III
SIO mode support
yes
Response time
1 ms
Switching frequency
500 Hz
LED risk group labelling
exempt group
MTTFd
600 a
Operating voltage
10 ... 30 V DC
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Switching current
max. 100 mA , resistive load
Degree of protection
IP67 / IP69 / IP69K

OBT650-R200-2EP-IO-V1-1T Related Documents